FMS Fmt10 Brushless Esc Wp-10 Bl120-RTR G2 
1:8 Buggy VULCANO HARD "V2" pre-mounted yellow (2) 
Switch for Winch 
FTX Outback Hi-Rock 17t Rc550 Motor 
31037-R Cnc Rear Bulkhead A&B 
1.5mm Titanium Allen PRO Wrench 
Hobbywing Ota Programmer 
FTX Utah LCG Body - Clear 
FTX Comet Monster /Truggy Front Wheel White 
FTX Trooper Pre-Assembled Complete Body W/O Light/Tyre - Red 
31053 Active Diff Segment 120°&Active Diff Gears SET 
Etronix Female JST Connector With 10cm 20awg Silicone Wire 
1:10 Alu. Buggy Wheel Set 2WD/4WD BLOCK rear 12mm Hex (2) 
FTX Grand Apache Front Headlight Led Light Set 
Adjustable Steering Rods (2) 
55KG Metal 1/12 RC Hydraulic Excavator 395F Remote Control Digger Dual Pump RTR Heavy Machine Flysky ST8 Radio Battery 6CH Valve 
31001 Rack Rail Adjust The Base 
Sparko F8 Plastic Steering Shim(4pcs) 
FTX Tracker Wheel/Tyre Complete (Pr) 
10905 Antirollbar Rear 
Killerbody Moveable Headlight 1/10 Touring Car 
FTX Outback Mini 3.0 Ranger Bodyshell - Green 
Front Chassis Support Set 
Key Specs
About this product
XFLY SWIFT X2100 TWIN GLIDER WITHOUT TX/RX/BATT
Derived from XFly Swift 2100 glider, X2100 is a FPV carrier aircraft designed by XFly Model team specially for FPV hobbyists. The X2100 adopts a glider layout design with a high aspect ratio, which has natural advantages in flight time and flight stability. Twin power systems allow it to easily achieve 1:1 thrust-to-weight ratio, and the large wingspan design of the aircraft provides ample space for future payload additions. Capacious battery compartment allows for common 4s Lipo batteries or 21700 batteries for optimised flight times.
All components of the X2100 can be assembled without glue and fixed with screws, featuring a safe and reliable design. A gimbal installation position is reserved on the nose section of the aircraft for a standard two-axis gimbal, or it can be modified by yourself. Twin powers distributed on each side, plus the reasonable match of axle distance and propeller, free you from the risk of propeller damage while landing.
Features
- The layout design of the glider has natural advantages in flight time and flight stability.
- Twin power systems and the large wingspan design providing ample space for future payload additions.
- Capacious battery compartment allowing for common 4S LiPo batteries or 21700 batteries for optimised flight times.
- All components can be assembled without glue and fixed with screws, featuring a safe and reliable design.
- A gimbal installation position is reserved on the nose section of the aircraft for a standard two-axis gimbal, or it can be modified by yourself.
Specifications
Wingspan: 2100mm/82.7”
Overall Length: 1050mm/41.3”
Flying Weight: 1500g
Motor Size: 2212-KV1400 *2
ESC: 40A *2
Servo: 9g servo*6
Channels: 5CH- aileron, elevator, throttle, rudder, flap
CG: 50mm from the leading edge
Wing Load: 38.5g/dm²
Wing Area: 35dm²
Recommended Battery: 4S 2600-3300mAh, 21700-4S1P-5000mAh, (21700-4S2P-10000mAh)
Approx Flying Duration: 10-30 mins
Assembly Time: 15 mins
Skill Level: Beginner
Age Level: 14 years +
Flap: Yes
Retract: No
Prop Size: 8×5” *2
Frequently Asked Questions
Yes, this is an ARR (Almost Ready to Run) model without Tx/Rx/Batt included, so you'll need to purchase a transmitter, receiver, and compatible 4S LiPo or 21700 battery separately before flying.
This model is designed for experienced FPV enthusiasts with intermediate to advanced experience in RC aircraft assembly and piloting.
The aircraft accepts 4S LiPo batteries (2600–3300 mAh recommended) or 21700 batteries (4S1P 5000 mAh or 4S2P 10000 mAh recommended) for optimised flight times.
Approximate flight duration is 10–30 minutes, depending on battery capacity, flying conditions, and piloting style.
The aircraft has a 2100 mm wingspan and 1050 mm length, weighing approximately 1500 g. All components assemble with screws and no glue required, taking roughly 15 minutes to build.
