Key Specs
About this product
XFLY 1800mm TWIN OTTER WITHOUT TX/RX/BATT
Modeled after DeHavilland DHC-6 Twin Otter, the XFly Model Twin Otter 1800mm was developed by their team with the intention to make it true-to-scale, from design features such as cockpit with clear windows, control surfaces, fixed tricycle landing gears, twin power system setup, to STOL(Short Takeoff and Landing) capabilities.
Powered by a single 6S 5000-6000mAh LiPo battery, the combination of twin 3541-KV550 motors, twin 40A ESCs and 3-blade propellers brings RC pilots the optimum setup for power and duration. The XFly Twin Otter is capable of aerobatic maneuvers including loops, 4-point rolls and inverted flight. Shock-absorbing metal front landing gear and rigid main landing gears are equipped for easy ground handling and more durability.
Two-piece wing, removable nose and stabs make it easy to assemble, dissemble and transport. Clear glass-like windows allow for FPV installation in the cockpit for better visual experience. Clearly visible in both day and dusk conditions, the vibrant yellow/blue colour scheme and the pre-installed LED lights not only add scale appeal but practical visual reference in the sky.
Features
- Retaining scale features of the full scale Twin Otter
- STOL (Short Takeoff and Landing) capabilities
- Cockpit with clear windows, control surfaces, fixed tricycle landing gears
- Factory-installed twin efficient power system
- Capable of aerobatic maneuvers including loops, 4-point rolls and inverted flight
- Shock-absorbing metal front landing gear and rigid main landing gears
- Two-piece wing, removable nose and stabs
- Clear glass-like windows and capacious cockpit allow for FPV installation
- Pre-installed LED lights for added visibility
- Vibrant yellow/blue colour scheme
Specifications
Overall Length: 1457mm/57.4in
Flying Weight: 3700g
Motor Size: 3541-KV550*2
ESC: 40A*2
Servo: 13g servos*2
Channels: 5CH- aileron, elevator, throttle, rudder/steering, flap
CG: 61mm from the leading edge
Wing Load: 87.5g/dm²
Wing Area: 40dm²
Recommended Battery: 6S 5000-6000mAh
Battery Connector: XT90
Approx Flying Duration: 5-10 mins
Assembly Time: 10 mins
Skill Level: Intermediate
Age Level: 14 years +
Flap: Yes
Retract: No
Landing Gear: Fixed main landing gear, steerable nose gear
Prop Size: 3-blade 10*7”
Required To Complete
- Radio
- Transmitter
- Battery and Charger
Frequently Asked Questions
This model is sold without transmitter, receiver, or battery. You'll need to purchase a 6S LiPo battery rated 5000-6000mAh, a compatible transmitter/receiver set (minimum 5 channels), and a suitable charger. Check that your radio system supports the required 5 channels: aileron, elevator, throttle, rudder/steering, and flap.
This is an advanced model featuring aerobatic capabilities, twin motors, and a larger 1800mm wingspan. It's better suited to experienced RC pilots with experience flying aerobatic aircraft, rather than beginners.
Flight duration depends on flying style and conditions, but the twin 3541-KV550 motor setup on a 6S 5000-6000mAh battery is designed for good power and duration. For specific flight time estimates, consult the instruction manual or contact the manufacturer.
The model arrives in ARR (Almost Ready to Fly) condition with the airframe, motors, ESCs, servos, and landing gear pre-installed. Assembly is straightforward thanks to the two-piece wing, removable nose, and detachable stabilisers, requiring only connection of your transmitter, receiver, and battery.
At 1800mm (57.4 inches) in length and 3.7kg flying weight, this is a substantial scale model Twin Otter. It features STOL (Short Takeoff and Landing) capabilities and is capable of aerobatic manoeuvres including loops, 4-point rolls, and inverted flight.
