FLISHRC AS350 Squirrel RTF FL500 V2 500-Class/Size Scale RC Helicopter

FLISHRC AS350 Écureuil (Squirrel) in factory livery livery — a 500-class scale RC helicopter modelled on the Eurocopter/Airbus AS350, supplied ready to fly. Fibreglass bodyshell, 3-blade main rotor head, brushless main and tail motors, and the L7 GPS flight controller all bolted up and trimmed at the factory. You unbox it, fit the canopy, charge the pack and you’re airborne.

The L7 flight controller does the heavy lifting on the sticks: GPS-locked hover, one-click return-to-home, attitude-assisted modes for newer pilots and full manual 6G for experienced ones. Quad-mode satellite positioning (BeiDou, GPS, Galileo and QZSS) gives faster lock and better signal stability than single-system controllers — useful when you’re flying at distance from buildings or in tree-shadow.

Flight controller features (FLISHRC L7 with GPS)

• GPS self-stabilising mode — locks the helicopter in 3D position with no stick input
• Attitude (ATT) mode — assisted attitude flying for intermediate pilots
• 6G mode — manual mode for experienced pilots
• One-click return-to-home
• Failsafe RTH — automatic return on transmitter signal loss
• Low-battery RTH — automatic return when pack voltage drops
• Bluetooth tuning via mobile app — adjust gains and limits without a PC
• Quad-mode satellite positioning (BeiDou + GPS + Galileo + QZSS)

Specification

• Class / size: 500-class scale
• Body shell: fibreglass, hand-painted in factory livery livery
• Overall size (L × W × H): 1000 × 230 × 290 mm
• Main motor: FLISHRC brushless
• Tail motor: FLISHRC brushless (independent direct-drive)
• ESC: FLISHRC 85A brushless
• Servos: 3 × FLISHRC FL690HV digital swashplate servos
• Flight controller: FLISHRC L7 with GPS module
• Battery: 4500mAh 6S 60C LiPo (included)
• Rotor: 3-blade main rotor head
• Recommended environment: outdoors, low-to-moderate wind
• Suitable for ages 18+

What’s in the box (RTF)

• 1 × FLISHRC AS350 Écureuil (Squirrel) (factory livery) 500-class scale helicopter
• 1 × transmitter (Mode 2 / left-hand throttle as standard — Mode 1 on request)
• 1 × 4500mAh 6S 60C LiPo flight battery
• 1 × battery charger
• 1 × getting-started guide

Final assembly is minimal — slide the chassis into the canopy, fit the horizontal stabiliser, attach the decals/decorative parts and tighten a handful of screws. The helicopter is pre-bound to the supplied transmitter and test-flown at the factory before shipping.