FLISH RC

FLISHRC L7 Flight Controller - For 450-800 Class Scale and Sport RC Helicopters or Drones

£191.05 £268.32 Save 29%
In Stock — ships today
SKU FLISH-L7-FC
🚚 Calculating…
24hr or 48hr delivery — choose at checkout ✓ Free delivery on orders over £129.99
🚚 Calculating…
24hr or 48hr delivery — choose at checkout ✓ Free delivery on orders over £129.99

About this product

FLISHRC L7 GPS Flight Controller — the same controller used in every FLISHRC 500-class FL500 V2 scale helicopter, sold here as a standalone upgrade for 450- to 800-class scale and sport helicopters, and for fixed-wing or drone projects that need a serious flight stack.

Why pilots choose the L7

  • Smooth, predictable hover from the first flight — minimal tuning required
  • Inherent stability from a redundant dual-IMU sensor stack
  • Comprehensive failsafes — your model comes home if you let go of the sticks

Hardware

  • Main processor: STM32H743 (Cortex-M7 core, 480 MHz, double-precision FPU)
  • Memory: 2 MB flash, 1 MB RAM
  • IMUs: dual ICM-42688P (redundant configuration)
  • Barometer: SPL06 high-precision
  • Vibration handling: physical damping plus filtering algorithms
  • Interfaces: CAN, UART, I²C, USB-C, OSD output
  • Wireless: Bluetooth Low Energy for in-app tuning
  • Power input: 5–12 V DC (independent supply recommended)

Flight features

  • GPS self-stabilise mode — ideal for scale flight and learning
  • Attitude mode and 6G manual mode for intermediate / advanced pilots
  • One-click return-to-home, failsafe RTH (signal loss), low-battery RTH
  • Quad-mode satellite positioning: BeiDou + GPS + Galileo + QZSS
  • Bluetooth parameter tuning via the FLISHRC mobile app
  • Open advanced parameters for experienced pilots

What’s in the box

  • 1 × L7 flight controller
  • 1 × GPS module with short cable
  • 1 × GPS module with long cable
  • 2 × GPS mounting bracket
  • 1 × XT30 connector pair (male + female)
  • 2 × LED status indicator (for FC)
  • 10 × nylon zip ties
  • 4 × foam double-sided adhesive pads
  • 1 × 180 mm male-to-male Dupont jumper set
  • 1 × USB Type-C data cable
  • 1 × USB buzzer module + cable

Important: the L7 supports 6S battery power supply. It is not suitable for direct 12S input; if you want to run 12S, contact us for the recommended step-down wiring.


Before we chat…

Please add your email so we can reply later if we are offline or dealing with another customer.

Please enter a valid email address.