Hobbywing Quicrun 3660sl 4500kv G2 Motor Black 
1:8 Buggy VULCANO SUPER SOFT "V2" pre-mounted yellow (2) 
Gensace Soaring Lipo 2s 7.4v-3300-30c (Xt90) 132.5x42x13.5mm 183g Gt 
FTX Dr8 Decal - Red 
1:10 Alu Slim-Line Dampers 70mm (2) 
1:8 Buggy WIND MEDIUM/SOFT Rubber Bulk ""B1COMP"" (4) 
Hobbywing Rotor Replacement Tool (540 Brushless Motors) 
Hobbywing Black/White Decal Sheet 
1:24 EP 2WD Touring/Drift Car RTR with ESP 
Absima Silicone Shock Oil "100CPS" 60ml 
1:10 EP Crawler CR3.4 "SHERPA" GREY RTR 
1:8 Buggy TWISTER ULTRA SOFT "V2" pre-mounted yellow (2) 
Hobbywing 3.2MM (1/8) to 5mm Motor Shaft Adaptor 
Killerbody Installation Mount Rear Shock Absorber Scx10/Ii 
Pink Performance AAA Alkaline 1.5V Dry Cell (4pcs) 
Key Specs
About this product
- 3S LiPo powered
- 1621 brushless outrunner motor provides a wide range of performance with the recommended 3S LiPo
- Waterproof mini brushless ESC
- Programmable with the Hobbywing program card (purchase separately)
- The 3S LiPo power eliminates the need for a 2-speed transmission
- Reduces overall weight and center of gravity due to removal of shift servo and shifting hardware
- Oversized brass whell hex hubs included (front axle only)
- Brass wheel weights included (front & rear)
- Increases ascent ability and confidence by increasing wheel speed with overdrive front axle gearing
- Includs 27% rear underdrive ring & pinion gear (less than the EVO Pro)
- HD portal stub axle with 1.5mm pins
- Revised HD plastic driveshafts (same like Arktos 6×6)
- New “Deep Star” 1.2″ plastic bead lock wheels with integrated brass wheel weights front & rear
- Bright graphics and wheels to offset the traditional crawler look
- Front 56% / Rear 44%
Frequently Asked Questions
Yes, this model is designed for both beginners and experienced users. The simplified single-speed transmission reduces complexity compared to dual-speed systems, making it easier to learn crawling fundamentals.
A 3S LiPo 360mAh battery and a 3S LiPo charger are included in the box. For specific charging times and procedures, consult the manual provided with your model.
The box contains the assembled CR18P crawler, a 2.4GHz 4-channel remote control, a 3S LiPo 360mAh battery, a 3S LiPo charger, and a manual. You'll need to supply 4 AA batteries for the transmitter separately.
At 1/16th scale, the CR18P measures 229mm long, 141mm wide, and 98mm tall with a 161mm wheelbase. The model weighs 474g and features 68mm diameter wheels.
The key feature is the single-speed transmission powered by a Hobbywing 3S brushless motor, which eliminates the need for a 2-speed gearbox, reducing weight and lowering the centre of gravity. The overdrive front axle gearing and underdrive rear gearing enhance climbing ability and confidence.
