Team Associated B74 Servo Mount Brace 
HPI Racing St-8 Wheel Matte Chrome (0Mm Offset/2Pcs) 
Team Associated rc10b74.1 Gear Differential Rebuild Kit V2 
Team Associated Turnbuckles 3.5 X 45mm Steel 
Team Associated Rc8b4 Body Posts 
Maverick RC DIFFERENTIALINTERNAL BEVEL GEARS 
Associated Ballstuds 3.25 Mm - Long 
Sparko F8 Center Differential Case 
HPI Racing Body Mount Set (Front/Rear) 
Battery Mounting Set 
Maverick RC Spur Gear 49T (1M) 
TC Kyosho Fazer FZ02-FZD2 (2) 
1:10 EP Sand Buggy "ASB1 CAMOUFLAGE-BLUE" 4WD RTR (incl. battery & charger) 
Team Associated 'Ae' Branding Decal Sheet 
TC Bumper & Body Mount Set Fazer 2.0 Kyosho 
HPI Racing 1973 Porsche Carrera RSR Clear Body 
HPI Racing Crankcase 
Maverick RC Rod End Set (Quantum2) 
Rlaarlo Parts: Servo Saver, Aluminum For terminator 
Blackzon Smyter Dt 1/12 4wd Electric Desert Truck - Green 
Switch Plate (Std) Alu - Kyosho Inferno Mp9 Tki3 
Savox Waterproof Digital Hv Servo 38kg/
Key Specs
About this product
ABSIMA FIRST STEP PERFORMANCE
Discover the RC model sport with the “First Step Performance” from Absima. More than 35 KM/H and power to the max you will get with this awesome model. Of course you will be supported by real RC model technique. A safe 2.4 GHz remote control system supports the 30A electronic speed controller to release the power at your command. Small, fine, and mean! Take the first step into the world of RC model sport with this ready-to-run set.
Highlights:
+ 35 KM/H
Splash water protected by complete chassis cover
Incl. 7.4V Li-ion battery and USB charging cable
Many parts exchangeable
General Chassis Features:
4WD
Metal wheel shaft with oil bearings
Differentials with ring & pinion gears (ball bearings)
380 brushed motor
30A speed controller/receiver unit
2kg steering servo (5 line)
Shock absorbers
Metal drive shafts
Radio range: up to 60m
Battery life time: up to 20 Minuten
Aluminum cardan drive shaft
Overheat protection
2.4 GHz radio system
Transmission ratio: 15:1
30° Steering angle (proportional)
Covered chassis and electronic parts
7.4V 1200mAh Li-Ion car battery
Radio battery: 3* AA batteries (not included)
Technical Specification:
Dimmension (L/W/H): 255 x 180 x 110 mm
Weight: 616 g (incl. battery)
Wheelbase: 165 mm
Ground clearance: 26 mm
Track width: 150 mm front / 150 mm rear
Wheel design: Sand Reef / 5 Spokes
Front wheels: Width 36 mm / Ø ± 65 mm
Rear wheels: Width 36 mm / Ø ± 65 mm
Dämpferöl Viskosität : n.a.
Shock spring force : Soft
Shock mounting size: 60 mm front / rear
Scope of delivery:
1/18 RC Car
2.4 GHz radio system
Car battery
USB charging cable
Manual with spare part list
Required accessories:
3x AA cells for radio
Frequently Asked Questions
Yes, the STORM is designed as an entry-level model under Absima's 'First Step Performance' range. It comes ready-to-run with everything needed except radio batteries, making it ideal for newcomers to RC motorsport.
A 7.4V 1200mAh Li-Ion battery and USB charging cable are included in the box. For exact charge times, check the manual as this varies depending on your USB power source.
At 1:18 scale, the STORM measures 255 x 180 x 110mm and weighs 616g with battery installed. It reaches a top speed of 35km/h with a runtime of approximately 20 minutes per charge.
The box contains the assembled RC truck, 2.4GHz radio transmitter, 7.4V Li-Ion battery, USB charging cable, and a manual with spare parts list. You will need to supply 3 AA batteries separately for the radio transmitter.
The chassis and electronics are splash water-protected by a complete chassis cover, though it's not fully waterproof. The truck features metal differentials, oil-bearing shafts, and metal drive shafts for durability, with many parts available as replacements.
