Xfly Supermarine Spitfire Mkix Bare Foam 1200mm Without Tx/Rx/Bat
Key Specs
About this product
XFLY SUPERMARINE SPITFIRE MKIX BARE FOAM 1200MM WITHOUT TX/RX/BAT
The Supermarine Spitfire, a British single-seat fighter aircraft was used by the Royal Air Force and other Allied countries before, during, and after World War II. It is one of the most iconic warbirds in history, renowned both for its beauty and its warfighting utility. The XFly Spitfire is a scale replica of this iconic fighter based on the famous Mk.IX variant, with a 1200mm wingspan and constructed using EPO foam. XFly captures the beautiful classic lines of the Spitfire Mk.IX with scale details including a 4-blade propeller, accurate canopy outline, pilot figure, exhaust stacks and cannons.
The large battery hatch can accommodate a 4S 2600-4000mAh LiPo battery for a wider range of flight times. The combination of a 3541-KV745 motor and a 40A brushless ESC offers plenty of power and achieves excellent thrust-to-weight ratio for a satisfying scale performance. The flap design on this model uses four panel split flaps for easier take-offs and landings, akin to its full-size counterpart. Day-bright LED wingtip lights aid in visibility and add realism.
Features
- High power 3541-KV745 motor and 40A brushless ESC offering outstanding thrust.
- Scale four panel split flaps for easier takeoffs and landings.
- LED wingtip lights for added visibility and realism.
- Scale 4-blade propeller.
- Large battery hatch for easy placement of the battery and radio equipment.
Please Note: This RC plane comes as unpainted EPO foam.
Specifications
Wingspan: 1200mm/47”
Overall Length: 1010mm/39.8”
Flying Weight: 1350g
Motor Size: 3541-KV745
ESC: 40A
Servo: 9g servo*6
Channels: 6CH- aileron, elevator, throttle, rudder, retract, flap
CG: 65mm from the leading edge
Wing Load: 60g/dm²
Wing Area: 22dm²
Recommended Battery: 4S 2600-4000mAh
Approx Flying Duration: 5-10 mins
Assembly Time: 15 mins
Skill Level: Intermediate
Age Level: 14 years +
Flap: Yes
Retract: No
Properller Size: 11×7” 4-blade
Frequently Asked Questions
This is a PNP (Plug and Play) model, so you'll need to supply your own compatible 6-channel transmitter and receiver. The aircraft is configured for 6 channels: aileron, elevator, throttle, rudder, retract, and flap control. Check that your existing radio system supports these functions before purchasing.
No, this model is rated for intermediate skill level and ages 14+. It requires experience in assembly, tuning, and flying a complex scale aircraft. If you're new to RC planes, we'd recommend starting with a trainer-grade model first.
You'll need a 4S LiPo battery in the 2600-4000mAh range. Flight time is approximately 5-10 minutes depending on your flying style and the specific battery capacity you choose. Always refer to the manual for proper charging procedures and safety precautions.
The Spitfire has a 1200mm (47-inch) wingspan and weighs 1350g when ready to fly. You receive the unpainted EPO foam airframe with all internal components installed (motor, ESC, servos, and LED lights), but you must supply the transmitter, receiver, and battery separately.
The 3541-KV745 brushless motor paired with a 40A ESC delivers excellent thrust-to-weight ratio for impressive scale performance. Assembly takes approximately 15 minutes. The four-panel split flaps also help with realistic takeoffs and landings similar to the full-size aircraft.
