FLISHRC Tiger EC665 (Green/Black Camouflage) RTR FL700 700 Class/Size Scale RC Helicopter
Key Specs
About this product
The FLISHRC Tiger is the Airbus (Eurocopter) EC665 Tiger attack helicopter rendered as a 700-size scale RC helicopter, finished in a two-tone green-and-black disruptive camouflage with TIGER fuselage titles. It is a significant step up from FLISHRC’s 500-class FL500 V2 range — 1,670 mm nose to tail, 5.6 kg dry, with a four-blade main rotor head, a complete scale weapons fit on both stub wings and a properly detailed tandem cockpit. Supplied ready to fly: built, rigged and set up at the factory, with only simple final assembly at your end.
About the aircraft
The Tiger is the Franco-German attack helicopter developed by Eurocopter — now Airbus Helicopters — and flown by France, Germany, Spain and Australia. It is one of the most distinctive gunships ever built: a narrow composite airframe, a stepped tandem cockpit with the gunner up front and the pilot raised behind, a roof-mounted sight ahead of the rotor mast, short stub wings carrying rocket pods and anti-tank missiles, and on the French HAP/HAD variants a chin-mounted turreted cannon. Slim, angular and purposeful — and a shape that translates beautifully into a large scale model.
The airframe
- 700-size scale fuselage in two-tone green/black disruptive camouflage, matte scale finish
- Moulded panel-line, rivet and access-panel detail throughout
- Four-blade main rotor head with scale-profile main blades
- Scale tail rotor, swept fin and horizontal stabiliser with endplate fins
- Stepped tandem cockpit with framed glazing and visible cockpit interior detail
- Roof-mounted mast sight fairing forward of the rotor head
- Chin-mounted multi-barrel cannon on a scale turret mount
- Both stub wings fitted — inboard rocket pods, outboard missile rails and wingtip sensor pods
- Scale engine intakes with mesh grilles, and scale exhaust nozzles
- Fixed sprung tricycle undercarriage — nose leg and two mainwheels, as per the full-size aircraft
- Applied stencilling, warning markings, nose insignia and tail DANGER decal
- Navigation and formation lighting
FLISHRC L7 flight controller with dual GPS
The Tiger runs the FLISHRC L7 flight controller with two GPS units, rather than the single module used across the 500-class range. A dual-GPS setup gives the controller a second independent position fix to work from, which means faster lock and a more stable hold — worth having on an aircraft this size and this expensive.
- GPS self-stabilising mode — holds the helicopter in 3D position with no stick input
- Attitude (ATT) mode — assisted attitude flying
- 6G mode — full manual, for experienced pilots
- One-click return-to-home
- Failsafe return-to-home on transmitter signal loss
- Low-battery return-to-home
- Multi-GNSS positioning — BeiDou, GPS, Galileo and QZSS
- Bluetooth tuning via mobile app — adjust gains and limits without a PC
Radiomaster TX15 with ELRS
The Tiger ships with a Radiomaster TX15 transmitter and an ExpressLRS receiver — a genuine open-source hobby-grade radio rather than the entry-level sets usually bundled with ready-to-fly machines. ELRS gives you long range, very low latency and a link you can actually rely on at distance. If you already fly ELRS, the receiver will bind to your existing kit.
Specification
- Subject: Airbus / Eurocopter EC665 Tiger attack helicopter
- Class / size: 700-size scale
- Livery: green and black disruptive camouflage with TIGER titles
- Length: 1,670 mm (excluding the chin gun)
- Height: 450 mm
- Width: 460 mm
- Weight: 5.6 kg (excluding battery)
- Main rotor: four-blade head
- Tail rotor: scale, conventional
- Power: brushless main motor and brushless tail motor, each on its own ESC
- Servos: 3
- Flight controller: FLISHRC L7 with 2 × GPS
- Radio: Radiomaster TX15 with ExpressLRS receiver
- Undercarriage: fixed sprung tricycle
- Build state: RTF / RTR — factory built, simple assembly required
- Recommended environment: outdoors, low to moderate wind
- Suitable for ages 18+
What’s in the box
- 1 × FLISHRC 700 Tiger EC665 airframe, built and set up
- 1 × FLISHRC L7 flight controller, with 2 × GPS
- 3 × servos
- 1 × main motor and 1 × tail motor
- 1 × main ESC and 1 × tail ESC
- 2 × flight batteries
- 1 × Radiomaster TX15 transmitter, with ELRS receiver
- 1 × set of main rotor blades
- 1 × set of tail rotor blades
Box contents are as specified by FLISHRC. A charger is not listed in the manufacturer’s pack — ask us if you need one and we will sort a suitable charger out with the order.
Assembly
Final assembly is simple and mechanical — fit the main and tail blades, fit the stabiliser, check control directions and charge the packs. There is no airframe build, no mechanical assembly and no rotor head setup to do.
Who it’s for
A 700-size machine at 5.6 kg dry and over a metre and a half long is a serious aircraft. It is not a first helicopter. We would recommend it to pilots who already fly a 500-class or larger collective-pitch helicopter, who have a suitable site with room to work, and who want a large scale subject that looks right in the air as well as on the ground.
