Kyosho 1:18 BMW 2002 Tii 1972 Yellow 
Kyosho 1:18 Alfa Romeo Giuletta Sv Targa Florio 1957 nr.24 
Killerbody Carbon Finish Lexan Sheet 203 X 305 X 0.5MM 
Kyosho 1:18 Jaguar Type E 3.8L MK1 Cup 1961 Dark Green 
Kyosho 1:18 Rolls-Royce Phantom Coupé 2008 Diamond Black 
Kyosho 1:64 Die Cast Collection Tyrrell P34 1977 No.4 
Fastrax Wood Board Climbing Prop Uneven Track 180x680x55mm 
Kyosho 1:18 Ferrari 250 GTO 3rd Over All LM 1962 NR.22 Blaton/Last 
Kyosho Mini-Z Grand Prix Circuit50 Corner Set 45 Degre (12pcs) 
Koswork 1:10 RC Crawler Backpack Bag (300x300x580mm) 
Kyosho 1:18 Lamborghini Countach Lp500r Black-White 
Team Associated Tc8 Ft Steel Rear Chassis Weight 18g 
Maverick RC Assembled AT1 Bodyshell (Blue) 
1:10 EP Sand Buggy "ASB1 CAMOUFLAGE-BLUE" 4WD RTR (incl. battery & charger)
Key Specs
About this product
This set is including everything for start driving – except radio batteries.
Features:
√ 1:10 Scale
√ 4WD
√ Ball bearing transmission
√ Adjustable oil shocks
√ CVD Steel Shafts
√ Powerful 550 15T Motor with Heat Sink
√ Water-resistant Speed Controller
√ Water-resistant Steering Servo
√ NiMH (6-cell; 7.2V) & LiPo suitable (2S up to 30C)
√ Ball bearing
√ Adjustable oil shocks
√ Gear differentials front & rear
√ Aluminum engine mount
√ Complete covered transmission
√ CVD steel shafts on front axle
√ Complete adjustable turnbuckles
√ Aluminum upper deck
√ Aluminum brace mount front & rear
√ Servo Saver
√ Dust cover for electric components and battery
Specification:
● Type: „ASB1BL” Brushless Sand Buggy
● Measure (L/W/H): 425x285x150mm
● Chassis Weight: 1895gr
● Wheelbase: 293mm
● Chassis Clearance: 40mm
● Tire Ø: ±107mm
● Tire Width front: 52 mm
● Tire Width rear: 52mm
Technical specification radio:
● 2-Channel Radio „CR2SV2”
● 3-Channel Receiver „R3FS”
● 2.4GHz A.F.H.D.S System
● Reverse Function
● Dual Rate & Drimming adjustable
● Case for 4 mignon AA batteries
Scope of delivery:
● „ASB1” Sand Buggy
● 2.4GHz Radio System
● Manual / Spare Part List
● Service Sheet
Frequently Asked Questions
This is a ready-to-run (RTR) model that arrives fully assembled and ready to drive, making it accessible to beginners. However, sand buggies with brushless motors and 4WD do require basic driving skills to handle properly, so some prior RC experience would be helpful.
The package includes both a NiMH 6-cell 7.2V battery and is compatible with 2S LiPo batteries (up to 30C). A charger is included, but exact charge times depend on the charger model—check the manual for specific timings.
The box includes the assembled buggy, 2.4GHz radio system, NiMH battery, charger, manual, and spare parts list. You'll need to purchase four AA batteries separately for the radio controller.
The 1:10 scale buggy measures 425mm long, 285mm wide, and 150mm high, weighing approximately 1.9kg. This is a compact size that should fit easily in most car boots.
The water-resistant speed controller and servo, combined with adjustable oil shocks and ball-bearing transmission, make it well-suited for sand and rough terrain. Water-resistant doesn't mean waterproof, so avoid submerging it, but light moisture and wet sand should pose no problem.
