Key Specs
About this product
XFLY SWIFT 2100 GLIDER WITHOUT TX/RX/BATT
XFly Model is proud to announce their first RC glider Swift 2100 that is easy to hand launch, quick to build and fun to fly! CFD(Computational Fluid Dynamics) was first used in the aircraft design by XFly team, which has enabled the Swift 2100 to achieve high lift-to-drag ratio and excellent aerodynamic characteristics.
The Swift 2100 features tough, composite-reinforced EPO foam and precisely positioned carbon fibre reinforcement through out. The factory-installed power system, including an efficient 3136-KV1000 brushless motor and a 40A brushless ESC, paired with a 3S or 4S Lipo battery,
delivers plenty of thrust for fast climbs to soaring altitude, sport flying and aerobatics.
The Swift 2100’s efficient aerodynamic design provides extended flight times up to 10-30mins with a mix of power on/off. The bottom wheel and plastic components on the wingtips and the tail allow the pilots to land on hard surface. Wing connectors and glueless design facilitate fast and easy assembly – only 6 screws needed to get the Swift 2100 ready to fly.
In addition, pilots can remove the folding propeller and add the optional nacelle(with XFly Galaxy 50mm EDF 4S power system installed) to the top of the fuselage for a different flying experience. FPV setup is also feasible with the optional canopy and servo-equipped camera mount available from XFly Model!
Features
- Efficient folding propeller, metal spinner and functional flaps
- Carbon fibre reinforcement throughout
- High-power brushless power system compatible with 3S or 4S Lipo batteries
- Efficient aerodynamic design for extended flight times up to 10-30mins
- Fast and easy assembly – no glue required and only 6 screws needed
- Optional nacelle for EDF setup
- Optional canopy and servo-equipped camera mount for FPV setup
Specifications
Wingspan: 2100mm/82.7in
Overall Length: 1050mm/41.3in
Flying Weight: 1350g
Motor Size: 3136-KV1000 motor
ESC: 40A
Servo: 9g servos*6
Radio: 6 channel
CG: 50mm from the leading edge
Wing Load: 38.5g/dm²
Wing Area: 35dm²
Recommended Battery: 3S/4S 2200-2600mAh
Battery Connector: XT60
Approx flying Duration: 10-30 mins
Assembly Time: 10 mins
Skill Level: Beginner
Age Level: 14 years +
Flap: Yes
LED: No
Retract: No
Landing Gear: No
Prop Size: 10″x6″
Required To Complete
- 6 channel radio system
- Battery (recommended 3S/4S 2200-2600mAh
For further information: on flying your RC plane in a safe and responsible manner please check out www.bmfa.org
Frequently Asked Questions
You'll need to purchase a transmitter, receiver, and a 3S or 4S LiPo battery separately, as these are not included. The rest of the power system (brushless motor and 40A ESC) comes factory-installed.
Flight time ranges from 10 to 30 minutes depending on your flying style—mixing powered flight with gliding will extend your airtime compared to continuous full throttle.
The Swift 2100 is hand-launch capable and features a glueless design with only 6 screws for assembly, making it relatively beginner-friendly in terms of setup. However, it requires a transmitter and receiver to operate, so you'll need some familiarity with RC flight controls.
With a 2.1-metre wingspan and 1.05-metre length, the Swift 2100 is a substantial aircraft. Wing connectors allow disassembly for transport, so it should fit in most vehicles when broken down.
The ARR (Almost Ready to Fly) kit includes the airframe with factory-installed brushless motor, 40A ESC, and six 9g servos, plus a folding propeller and metal spinner. Assembly requires no glue and takes only 6 screws to complete, with wing connectors enabling quick setup.
