FTX Zorro Nt Clear Bodyshell (Pre Cut) 
HPI Racing Tp. Button Head Screw M2.6*12Mm (10Pcs) 
FTX Kanyon Clear Body W/Roll Cage, Spotlights & Tray 
Hobao Hyper Vs 1/8 Pro Buggy 
FTX Outback Mini X 2.0 Patriot Lexan Body - Red 
Maverick RC Microbe 1/24th Buggy - Blue 
FTX Mauler Painted Body Panels - Red 
HPI Racing Aluminium Aerial Mount Bullet/Trophy Nitro (Black) 
Joysway Df95 Boat Storage and Transport Case - Blue 
HPI Racing Shock Spring 10x33x0.6mm 14.5 Coils (Medium) 
FTX Zorro Nt Printed Body - Orange 
Performa Racing P1 Graphene HV Lipo Shorty 4000 ULCG 7.6V 120C 
1:16 Monster Truck MINI AMT yellow/green 4WD RTR 
HPI Racing Drive Gear Shaft 
HPI Racing Gear Shaft 5X38X7Mm 
HPI Racing Front Upper Plate (Gunmetal) 
Fastrax Led Twin Antenna 18cm Light Length - White 
FTX Outback Mini X 2.0 Texan Glossy Green Complete Pre-Built Body 
1:10 Wheel Set ""Rallye Street Design"" black (4) 
HPI Racing Belt S3M 174 Ug 4Mm (Rear/Sprint). 
HPI Racing Sway Bar 2.6mm/Long (Silver) 
FTX Moray 2.4ghz Transmitter 
Fastrax Nitro Starter Set (Uk Plug) With 3000mah Glow Starter 
HPI Racing Pinion Gear 18 Tooth (48Dp) 
Maverick RC FRONT UPPER SUSPENSION ARM (2PCS) 
HPI Racing Venture18 Flux 1985 Toyota Hilux SR5 - Creme (T) 
HPI Racing Bullet MT 3.0 
Maverick RC FRONT BODY POST (STRADA EVO XB) 
Fastrax Beadlock Wheel Studs Screws (30pcs) 
Fastrax Tamiya Tt01 Aluminium Rear Lower Arm (Pr) 
HPI Racing 1966 Ford Mustang Gt Body 
Key Specs
About this product
VOLANTEX RANGER 1600MM GLIDER WITH ABS FUSELAGE ARTF
Features
- Light weight and durable EPO wing construction.
- Plug-in and click structure, easy to assemble.
- Big cabin to install more equipment.
Specifications
Wingspan: 1600mm
Overall Length: 1100mm
Flying Weight (without battery): –
Prop Size: 8040 Folding Propeller
Motor Size: 2212/1400KV powerful out runner brushless motor
Speed Control: Easy-Plug 30A Switch-mode BEC brushless ESC
Servo: 9-gram Servo * 4pcs
Recommended Battery: 11.1V 1800mAh Li-Po
Recommended Charger (Not Supplied): 3S LiPo balancing charger, 0.5A
Recommended Radio (Not Supplied): 2.4Ghz 6-Channels
Ailerons: Yes
Flaps: No
Minimum Age Recommendation: 14 years
Experience Level: Beginer ~ Expert
Recommended Environment: Outdoor
Assembly Time: Less than half hour
Is Assembly Required: Yes
Needed To Complete
- Transmitter
- Receiver
- Battery and charger
Frequently Asked Questions
Yes, the Ranger 1600mm is rated for beginner through expert pilots. However, you'll need to supply your own 2.4GHz 6-channel radio system and 11.1V 3S LiPo battery with charger, so some prior RC experience or guidance is recommended.
You'll need to purchase a 2.4GHz 6-channel radio transmitter/receiver, an 11.1V 1800mAh Li-Po battery, and a 3S LiPo balancing charger (0.5A recommended). The motor, ESC, servos, and propeller are included.
Assembly takes less than thirty minutes thanks to the plug-in and click structure design.
The Ranger has a 1600mm wingspan and 1100mm overall length, making it a mid-sized glider suitable for outdoor flying areas.
An 11.1V 1800mAh Li-Po battery is recommended. For exact charge times, consult the manual for your specific charger, but a 0.5A 3S LiPo balancing charger is suggested.
