HPI Stage-D24 2024 Toyota GR Supra Metallic Dawn Blue 1:24 RWD Drift RTR

The HPI Racing Stage-D24 brings proper rear-wheel-drive RC drifting down to a scale you can enjoy almost anywhere. Built on a ground-up bespoke 1:24 chassis and finished with an officially licensed 2024 Toyota GR Supra hardbody, it arrives fully assembled and ready to drift straight out of the box.

Officially licensed Toyota GR Supra hardbody

Rather than a conventional lightweight polycarbonate shell, the Supra is built as a detailed 16-piece hardbody with clear windows and separate light buckets. The result is a scale realism that suits the miniature size perfectly. This is the Metallic Dawn Blue factory finish.

Magnetic body mounting

No body posts poking through that Supra roofline. A magnetic mounting system locates the body securely while keeping the exterior clean — simply sit the shell on the rear body tongue, lower it onto the chassis and the magnets do the rest. Removing and refitting the body takes seconds.

Front and rear LED lighting

Integrated LED headlights and tail lights bring the Supra to life, controlled directly from the TF-805 transmitter with On, Off and Daylight Running modes at the touch of a button.

Built to hold angle

Up to 67.5 degrees of steering angle, independent front suspension and adjustable steering links give the front end the freedom needed for serious counter-steer. Track width and wheelbase are both adjustable, so you can fine-tune the handling and stance — or fit different bodies later on.

Rear-wheel-drive drivetrain

A compact rear-mounted 3-gear transmission sends power to the rear wheels through a spool differential and CVD driveshafts. The motor sits on a 3mm orange anodised aluminium motor plate, and a T-bar rear suspension system lets the chassis flex while keeping the package light and simple.

Gyro assistance you can dial in

The SRL-805 combines ESC, gyro, receiver and LED controller into a single compact unit. Gyro gain is adjustable on the fly from Channel 5 of the transmitter, so newcomers can turn the assistance up while learning and wind it back as their car control improves.

Everything included

Supplied with the TF-805 5-channel 2.4GHz transmitter, a 37T brushed MM-050 motor, an MS-01WR 6.0V 0.85kg micro steering servo, a 7.4V 360mAh LiPo battery and a USB balance charger. Additional chrome drift decal sheets are included so you can put your own stamp on it.

Specifications

• Scale: 1:24 dedicated RWD drift chassis
• Length: 183mm · Width: 80mm
• Adjustable front track width: 76mm to 85mm
• Adjustable rear track width: 70mm to 85mm (extremes require optional driveshaft sets)
• Steering angle: up to 67.5 degrees
• Motor: 37T brushed MM-050
• Electronics: SRL-805 combined ESC / gyro / receiver / LED controller
• Servo: MS-01WR 6.0V 0.85kg micro
• Radio: TF-805 5-channel 2.4GHz
• Battery: 7.4V 360mAh LiPo with USB balance charger

You will need

• 4 x AA batteries for the transmitter

Specification may be subject to change.