Fastrax 1/10th 85mm Alloy Adjustable Shocks (Pair) 
HPI Racing Pinion Gear 21 Tooth (Savage 3 Speed) 
HPI Racing Aluminum Heatsink Head 56X50Mm (F4.6) 
HPI Racing Q32 D8T Tessmann Edition Body (Clear) 
Fastrax 1/10 Mega-v Truck Tyre Mounted on 12-Spoke (12mm Hex) 
Fastrax Fast Finish Candy Ice Purple Spray Paint 150ml 
HPI Racing 2 Speed 1St Aluminum Gear Adapter (Op Nitro) 
Fastrax Beadlock Wheel Studs Screws (30pcs) 
HPI Racing Axle Shaft (5X237Mm/4Pcs) 
Fastrax Led Twin Antenna 29cm Light Length - Green 
Fastrax Led Antenna 7cm Light Length - Yellow 
Etronix 16awg Silicone Wire Red (100cm) 
Fastrax Tamiya Tt02 Aluminium Adj. Front Upper Arm (Pr 
Sparko F8 Center Gear 46t With Differential Seal 
HPI Racing Vented 2Mm Brake Disc (Pr) 
FTX Vantage Rear Buggy Tyre Mounted on Wheels (Pr) - Black 
HPI Racing Button Head Screw M2.5X25Mm (Hex Socket/10Pcs) 
Etronix 20.3KG/0.16S Standard Digital Servo Metal Gear 
Fastrax Mini Maxx 304 Steel CVD Driveshaft Set (4pc) 
FTX Zorro Tyres & Foam (Pr) 
Fastrax Tamiya BBX Bb-01 Aluminium Complete Gearbox & Cover 
Etronix Li-Po Regulator 6.0v 5a W/Casing 20x14x49mm 
Fastrax Tamiya Tt02 Alum Front Steering Blocks (Pr) 
Fastrax Light Unit Headlight Brake/Indicator 2 Settings 
Fastrax 1/10 Street/Tread Tyre 20sp Gun Metal Wheel 
FTX Mini Decal Sheet 
Fastrax 48dp 33t Aluminium 7075 Pinion Gear 
Fastrax Deluxe Aluminium Winch Hook (2pc) - Blue 
About this product
For maximum power in your 1/10th scale on- or off-road vehicle, you need a powerful and versatile motor! This 3700KV motor has loads of power, enough for big air, huge top speeds, and wheel-spinning, grin-inducing sideways stunts!
The FLX10-3660-3700 is great for all kinds of 1/10th scale vehicles:
buggies
touring cars
scalers
drifters
Mini racers
crawlers
desert buggies
vintage touring cars
stadium trucks
short course trucks
desert trucks
3700kV Sensorless Brushless 4-Pole 1/10th Scale Motor
5mm Shaft
4mm bullet connectors
Use the awesome #160942 FLX-10 3S802 Flux ESC with XT-60 for complete control and versatility!
NOTE: Before driving in wet conditions, make sure that other electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant – we recommend disconnecting the fan from the ESC before driving in wet conditions and allowing it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when underwater. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.
