GPM Racing Medium Carbon Steel+6061 Alloy Rear Driveshaft Assembly with 6 Mm Axle for Traxxas 1/10 Ford F-150 Raptor R-101076-4 (FR106R)

Precision rear driveshaft for TRAXXAS 1/10 platforms

This rear driveshaft assembly is specified for select TRAXXAS 1/10 vehicles and is identified as FR106R. The assembly combines 6061 aluminium alloy components with medium carbon steel elements in a constant-velocity configuration to manage rotating mass while improving drivetrain engagement versus stamped or plastic shafts.

Engineered for the rear drive shaft area, the component uses a 6 mm axle on the principal compatible models listed below. The CVD geometry provides steadier torque transfer during acceleration and suspension articulation, delivering a balance of improved durability and reduced drivetrain lash for Slash, Stampede, Rustler and Ford F-150 Raptor chassis variants.

Service notes: replace the rear driveshaft assembly in the rear drive shaft area, verify axle diameter before installation, and secure original screw pins and retaining hardware to recommended torque. Certain TRAXXAS 4×4 variants indicated below use 5 mm axles and require the #9080 upgrade kit to adapt this assembly.

Packing includes

• Rear Driveshaft Assembly – 2pcs
• Screw Pin 4×2.5×13 – 2pcs

Original Name / Part No:

9052

Compatible Models

• TRAXXAS 1/10 FORD F-150 RAPTOR R-101076-4
• TRAXXAS 1/10 Rustler 4X4 Brushless -67164-4
• TRAXXAS 1/10 Rustler 4X4 VXL-67376-4
• TRAXXAS 1/10 Slash 4X4 Brushless-68154-4
• TRAXXAS 1/10 Stampede 4X4 Brushless-67154-4
• TRAXXAS 1/10 Stampede 4X4 VXL-90376-4
• The following model types below are 5MM axle (for use with #9080 upgrade kit)
• TRAXXAS 1/10 4WD HOSS 4X4 VXL 3S-90076-4
• TRAXXAS 1/10 RUSTLER 4X4 VXL-67076-4
• TRAXXAS 1/10 Rustler 4X4-67064-1
• TRAXXAS 1/10 Rustler 4X4-67064-61
• TRAXXAS 1/10 Slash 4X4 Ultimate-68077-4
• TRAXXAS 1/10 Slash 4X4 VXL-68086-4
• TRAXXAS 1/10 Slash 4X4-68054-1
• TRAXXAS 1/10 Slash 4X4-68054-61
• TRAXXAS 1/10 Slash 4X4 VXL-68286-4

For precision-minded RC users requiring a lower-inertia rear shaft with dependable CVD behaviour, FR106R is a practical upgrade; verify axle diameter and use the #9080 adaptor for 5 mm variants.

What measurements confirm correct fitment?

Measure the axle journal diameter and compare with the compatible list; the specified 6 mm models are listed at the top of the compatibility box.

How does material selection affect fatigue life?

6061 alloy provides a good strength-to-weight ratio while the medium carbon steel components handle spline and load-bearing interfaces, together extending usable life under typical hobby duty cycles.

Is the #9080 adapter necessary for some models?

Yes, models identified as 5MM axle in the compatibility list require the #9080 upgrade kit to safely adapt this 6mm driveshaft assembly. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.