GPM Racing Aluminium Servo Mount +Aluminum Tie Rod+25T Aluminium Servo Horn for Traxxas 1/10 MAXX (TXMS024N)

Precision aluminium servo mount and tie rod

This CNC-style aluminium upgrade is intended for the TRAXXAS MAXX chassis to replace the OEM servo mount, tie rod and servo horn components. The machined parts re-position and secure larger servos using the 2075x footprint while preserving correct steering link geometry and suspension articulation for precise control.

The components are intended for hobbyist tuning and fitment only. Installation requires removing the stock plastic parts and fitting the aluminium pieces with the supplied stainless steel screws and counter shims to set servo height and horn offset accurately. The kit provides a firmer mounting surface suited to higher-torque servos and 25T horns where reduced flex and consistent alignment are required.

Packing includes

• Servo mount – 1pcs
• Aluminium Tie Rod – 1pcs
• Aluminium Servo Horn – 1pcs
• Stainless Steel Flat Head Screw 3×8 – 2pcs
• Stainless Steel Round Head Screw 3×8 – 3pcs
• Stainless Steel Round Head Screw 3×14 – 2pcs
• Stainless Steel Cap Head Screw 3×10 – 1pcs
• 3mm Counter Sink Shims – 2pcs
• 3×7.5×2 Alloy Shim – 3pcs

Compatible Models

• TRAXXAS-1/10 4WD MAXX MONSTER TRUCK -89076-4

Use this precision upgrade when fitting a larger 2075x-style or similar high-torque servo to a TRAXXAS MAXX to ensure a rigid, serviceable mounting solution and accurate horn clearance control.

What are the critical checks after installation?

Verify servo horn centring, full lock clearance and that shims remove any binding throughout steering travel; confirm all stainless screws are torqued to a light, consistent setting.

Does the kit change tie rod geometry?

The aluminium tie rod replaces the original link and is sized to maintain factory geometry; minor toe adjustments may be required to suit servo centre offset or horn selection.

Recommended torque practice for aluminium parts?

Use a torque-aware approach with aluminium fastenings: tighten incrementally and avoid over-torquing to prevent thread deformation, using thread locking if required for long term use.

Can I reuse the stock servo horns with this mount?

Compatibility depends on horn spline and clearance; the kit includes an aluminium servo horn for 25T splines, but some stock horns may be usable if dimensions match without interference. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.