GPM Racing Aluminium Rear Gear Box for Losi 1/18 2WD Mini-T 2.0 Stadium Truck (LM013)

Machined 6061 T6 rear gear box for TEAM LOSI MINI-T 2.0

This CNC-machined aluminium rear gear box assembly is engineered for the TEAM LOSI MINI-T 2.0 2WD chassis. The precision set replaces the rear gear box area components to reduce compliance at the differential, damper mounts and knuckle arm interfaces while prioritising dimensional accuracy and long-term durability.

Engineering notes: the use of 6061 T6 aluminium and controlled CNC finishing increases tensile strength and improves thermal conductivity compared with injection-moulded plastics, helping to dissipate heat from the spur and adjacent gears under sustained loads. Close machining tolerances minimise backlash around the differential and steering link interfaces, supporting repeatable handling when tuning suspension or differential parameters.

Assembly guidance: the kit is supplied with stainless fasteners to replace the rear gear box area. Retain stock bearings and shafts unless specific replacements are required by your build manual. Apply correct thread engagement and torque practice on the supplied screws to avoid distortion of precision mating surfaces. After installation, inspect differential preload and wheel alignment to confirm geometry and handling are as expected.

Specifications

• Item: Rear gear box set, 13 pcs
• Material: Aluminium 6061 T6
• Model Number: GPM LM013
• Compatibility: TEAM LOSI MINI-T 2.0 2WD

Intended as a precision aftermarket upgrade, this aluminium rear gear box increases rear-area stiffness and improves heat transfer; use it as a tuning component when refining differential and suspension settings.

What does the LM013 package contain?

The package includes the 13 CNC-machined aluminium rear gear box components and the stainless steel fasteners required to secure the assembly to the chassis.

How does machining tolerance impact performance?

Tighter CNC tolerances reduce unwanted play around the differential and link mounts, which improves predictability in handling and allows finer suspension and differential setup adjustments.

Are any stock parts replaced or reused?

The kit replaces the rear gear box area. Stock bearings and shafts are typically retained unless the vehicle manual specifies otherwise; confirm fit during assembly.

Recommended installation practice?

Use proper thread engagement and torque control on supplied stainless screws to preserve precision mating surfaces, then verify differential preload and wheel toe as part of setup validation. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.