GPM Racing Aluminium 6061-T6 Front and Rear Damper 49mm for Axial 1/24 AX24 Xc-1 4WS (AX24049FR)

49mm front and rear damper for AX24 XC-1

This damper kit is engineered for the AXIAL AX24 XC-1 and constructed from Aluminium 6061-T6 in a 49mm length to suit standard AX24 shock mounts. The design reduces internal friction and provides impact absorption for low-speed rock crawling to maintain vehicle stability on technical lines.

Fine tuning is achieved through the adjustable top spring retainer which alters spring preload and effective stiffness without disassembling the shock body. The assembly ships with the fitted black springs retaining the original wire diameter plus four 0.35mm silver replacement springs for incremental rate changes.

Supplied parts include the cap head mounting screws and the set of replacement springs required to switch spring rates. These dampers can be mounted in either front or rear locations on the AX24 XC-1 chassis; check shock eye spacing and mount alignment prior to final installation.

Packing includes

• Damper – 4pcs
• 0.35mm Silver spring – 4pcs
• Cap Head screws 1.4*10 – 4pcs

Original Name / Part No:

AXI203001

Compatible Models

• AXIAL-1/24 AX24 XC-1 4WS CRAWLER BRUSHED RTR-AXI00003

Use the 49mm aluminium dampers to optimise axle articulation and spring characteristics on a 1/24 AX24 XC-1 crawler, adjusting the top retainer and swapping the supplied springs for precise tuning.

What mounting checks are recommended before fitting?

Verify shock eye-to-eye measurement and that mount holes align with the damper’s eyelets; confirm there is clearance for travel and link geometry.

How should I approach spring selection?

Begin with the fitted springs and adjust preload via the top retainer; use the 0.35mm spare springs to incrementally increase rate if additional stiffness is required.

Routine service items?

Inspect spring seats and retainers for wear, ensure fasteners remain torqued, and replace damaged springs to maintain consistent damping behaviour. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.