GPM Racing Alloy 6061 Front & Rear Shock Towers + Front (58mm)+Rear (60mm) Oil Filled Ultra Shocks for Traxxas 1/10 Ford GT 4-Tec 2.0 (GT28305053)

Precision aluminium shock towers and damper assembly

This GT28305053 28pcs set is a technical aftermarket suspension kit for RC-scale models that pairs CNC-friendly 6061 T6 aluminium shock towers with shorter oil-filled dampers to allow controlled changes to ride height and chassis geometry. The package combines front 53mm and rear 50mm dampers with anodized aluminium towers to provide a stable mounting platform in place of standard polymer parts.

The dampers feature increased shaft diameter and heavier coil springs for improved consistency, and the kit includes a full hardware set to replace existing shock mounts and fixings. Use the multiple tower mounting positions to precisely alter shock angle and maintain repeatable geometry when lowering chassis height by the defined amount.

Packing includes

• Front Shock Towers – 1pcs
• Rear Shock Towers – 1pcs
• Damper – 4pcs
• Stainless Steel Round Head Screws 3×10 – 8pcs
• Stainless Steel Round Head Screws 3×14 – 4pcs
• Stainless Steel Round Head Screws 3×6 – 2pcs
• Stainless Steel Round Head Screws 3×16 – 4pcs
• Alloy Collar 3x6x2 – 4pcs

Original Name / Part No:

8338,83601

Specifications

• Item: Aluminium Front & Rear Shock Towers + Front (53mm) + Rear (50mm) Oil Filled Dampers – 28pcs set
• Material: 6061 T6 aluminium (towers) and steel damper shafts
• Model Number: GT28305053
• Compatibility: RC-scale models (aftermarket suspension parts)

Designed for hobbyists seeking a durable aluminium mounting solution and controlled ride height adjustments; confirm dimensional fitment with your chassis before final assembly.

This item is compatible with

• TRAXXAS FORD GT4-TEC 2.0

What specific items are in the kit?

The kit contains two aluminium shock towers, four oil-filled dampers (53mm front, 50mm rear) and the stainless screws and alloy collars listed under Packing includes for direct replacement of common mounting hardware.

What are the tower material and finish?

Towers are machined from 6061 T6 aluminium and anodized to provide a corrosion resistant surface and stable mounting points for the supplied hardware.

How should I approach setup after fitting?

Install towers using the supplied hardware, set initial spring preload, then measure ride height and adjust shock angles using the available tower holes to achieve repeatable geometry; verify damping and tighten fasteners after test runs. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.