GPM Racing 7075 Alloy Front Oversized Steering Blocks for Traxxas 1/6 Funco Pro Scale 2WD Sand Car 8S-109076-4 (TPS021)

Precision CNC 7075-T6 steering blocks for Funco Pro

The TPS021 steering block assembly is engineered as a one-piece 7075-T6 aluminium solution for the TRAXXAS Funco Pro Scale 2WD sand car. CNC machining ensures consistent tolerances to stabilise the front CVD while maintaining factory steering geometry and alignment.

Internal bearing sizing is increased to 17x30x7 while the external 15x24x5 bearing is retained to enlarge the contact footprint and lower localized bearing pressure. The reinforced suspension pin holder reduces axial play and the use of high-precision bearings decreases friction, resulting in improved steering response under heavy loads.

All hardware and bearings arrive pre-assembled to maintain concentricity and ease installation. The parts mount externally to the front C hubs and steering blocks; apply medium-strength threadlocker to fasteners to secure the assembly during repeated impacts and sandy running conditions.

Packing includes

• Front Steering Blocks – 2pcs
• Bearing 17x30x7 (Inner, Oversized Bearing) – 2pcs
• Bearing 15x24x5 (Outside, Original Bearing) – 2pcs

Original Name / Part No:

10936+7743

Compatible Models

• TRAXXAS 1/6 FUNCO PRO SCALE 2WD SAND CAR 8S-109076-4

For precision-focused upgrades, TPS021 delivers CNC accuracy, beefed-up pivot support and larger bearing contact to reduce friction and extend service life under sand and off-road conditions.

What are the machining tolerances and material spec?

Components are CNC machined from 7075-T6 aluminium with tight dimensional control to ensure correct bearing seating and consistent pivot alignment for reliable steering geometry.

How does the larger inner bearing affect load distribution?

The 17x30x7 inner bearing increases contact area and spreads radial loads, which reduces bearing stress and decreases steering friction under torque and side loads.

Is the suspension pin holder a serviceable wear item?

Yes. The reinforced holder reduces loosening, but inspect pins and holders during routine maintenance and replace if visible wear or clearance develops.

Recommended installation practice for longevity?

Fit using correct bearing press technique to avoid preloading, secure fasteners with medium-strength threadlocker, and verify bearing rotation free-play after initial installation and break-in. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.