GPM Racing 4140 Carbon Steel Front & Rear Extend CVD Shaft (110mm) with 7075 Alloy Wheel Lock & Hex Claw for Traxxas 1/10 MAXX W/Widemaxx 2.0 Monster Truck-89086-4 (TXMW110FRSN)

Technical overview of the 110mm extend CVD

This aftermarket 110mm extend CVD shaft is engineered for TRAXXAS MAXX platforms using WIDEMAXX components and serves as a direct replacement for either front or rear driveshaft assemblies on 1/10 MAXX models. It is specified to improve drivetrain stiffness and reduce incremental wheel play under load without modifying wheel interface geometry.

The assembly centres on a 4140 carbon steel main shaft combined with a lengthened 7075 alloy wheel lock and a matching hex claw. A capped outdrive design helps mitigate sand and dust ingress at the joint. The wheel lock incorporates internal knurling to boost mechanical engagement at the hex and lower the chance of wheel loosening during sustained operation.

Installation replaces the stock driveshaft and uses the supplied bearings and fasteners. From a tuning perspective the component is chosen to raise torsional rigidity and maintain consistent torque transfer across the drivetrain rather than to alter suspension or steering kinematics.

Packing includes

• Drive Shaft – 1pcs
• Diff Outdrive – 1pcs
• bearing 17x23x4 – 1pcs
• bearing 8x16x5 – 1pcs
• Screw Shaft M4x2.5×17 – 1pcs
• Set Screws M4x5 – 1pcs
• Wheel Lock – 1pcs
• Wheel Hex Claw – 1pcs
• Steel Pin 3×15 – 1pcs

Original Name / Part No:

8996X

Compatible Models

• TRAXXAS 1/10 MAXX W/WIDEMAXX MONSTER TRUCK-89086-4 Maxx 2.0

A precision-focused driveshaft replacement aimed at hobbyists and tuners who require improved wheel retention and increased drivetrain rigidity for TRAXXAS MAXX WIDEMAXX builds.

What are the key material choices and benefits?

The main shaft uses 4140 carbon steel for increased torsional strength, while the 7075 alloy wheel lock provides a durable clamping surface and improved wear resistance at the wheel interface.

How does the capped outdrive affect maintenance?

The cap reduces ingress of debris into the outdrive, lowering cleaning frequency and helping preserve joint life; inspect the cap seal during routine maintenance and clear any trapped material.

Are bearings supplied and what sizes are included?

Yes, the package contains the listed bearings including 17x23x4 and 8x16x5 sizes together with the screw shaft and set screws required for assembly.

Does this change wheel interface geometry?

No, the wheel lock is lengthened to improve clamping and grip but is designed to preserve the original wheel mounting interface and offset. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.