Centro 12mm Big Bore Front Shock Absorbers 90mm (Pr) 
Hobbywing Xerun V10 4.5t Black G3 Motor 
Etronix Xt-90 Connector (Male/Female) Black 
Centro 2S 5000Mah 7.4V 100C 
Centro 1/10 Dished Buggy Front 4wd Wheel Yellow - 3 Pairs 
Centro Mini Soldering Iron Large Sloped Replacement Tip 
Associated B74 Ft Side Rails Carbon 
Centro Graphite Fan Cover 40x40mm 
Fastrax 1/10th Mounted Arrow Buggy Front Tyres 10-Spoke 
Hobbywing Seaking 54113sl 800kv Black Motor V2 
Fastrax 1/10th Mounted Buggy Tyres Lp 'Arrow' Rear 
Reedy Sc480x Program Card 
Associated RC8B3.1/RC8B3.2 Diff Case 
Hobbywing Quicrun 2435-4500kv G3 Motor 1/16 & 1/18 (2.0MM Shaft) 
Etronix Sm Female Connector to Tamiya Male Plug 
Hobbywing Xerun 3660sd 4200kv Black G3 Motor 
Centro Diff Grease 40g - For Ball Diffs, Rebuilds, Extends Life 
Rlaarlo Omni-Terminator Carbon MINI 1:10 Scale Brushless Monster Truck, RZ001B-C 
Associated Cr12 Shock Piston (2 Holes) 
Hobbywing Ezrun 1/5th Sl 56113-800kv Motor (Black) 
#Dp-Yd2Rtrw-2 - Yokomo Drift Package 2Wd Rtr - Gr Supra Body - White 
Hobbywing Quicrun Combo Esc G2 10bl60/3650sd 10.5T G2 Motor 
Etronix 4.0MM Male Gold Connector (2) 
Etronix 2s 30cm Balance Lead Extension Wire (Jst-Xh) 
Hobbywing Quicrun Outer 1621sl 3500kv Motor Black (1/24th) 
Hobbywing Quicrun 3650 G2 10.5T Sensored Motor 
About this product
Piggyback shock absorbers are characterised by the fact that there is an expansion tank on the side of the shock absorber housing, which performs various functions.
The expansion tank is an additional reservoir for oil, some of which has an enlarged surface area due to cooling fins. If the oil in shock absorbers becomes too hot due to extreme loads, the damping function is lost due to gas formation in the oil. To prevent this, the additional oil reservoir increases the oil quantity and enlarges the cooling surface of the shock absorber housing so that the oil as a whole does not heat up so quickly due to the extreme load.
To prevent leakage during transport, only our shock absorber housings are filled with 100CPS oil as standard. For full performance, the expansion tank must also be well filled with oil.
Features:
Shock absorber housing and piggyback housing made of aluminium
Spring preload adjustable via knurled screw
3.0mm piston rod
Filled with 100CPS oil (shock body only)
Tech Specs:
Complete length: 85mm
Installation length: 75mm
Weight/piece (filled): 28g
Scope of delivery:
1 pair of shock absorbers
Average customer rating:
Number of Customer reviews: 0
Write an online review of this item and show it to other visitors!
