Key Specs
About this product
ABSIMA FIRST STEP PERFORMANCE
Discover the RC model sport with the “First Step Performance” from Absima. More than 35 KM/H and power to the max you will get with this awesome model. Of course you will be supported by real RC model technique. A safe 2.4 GHz remote control system supports the 30A electronic speed controller to release the power at your command. Small, fine, and mean! Take the first step into the world of RC model sport with this ready-to-run set.
Highlights:
+ 35 KM/H
Splash water protected by complete chassis cover
Incl. 7.4V Li-ion battery and USB charging cable
Many parts exchangeable
General Chassis Features:
4WD
Metal wheel shaft with oil bearings
Differentials with ring & pinion gears (ball bearings)
380 brushed motor
30A speed controller/receiver unit
2kg steering servo (5 line)
Shock absorbers
Metal drive shafts
Radio range: up to 60m
Battery life time: up to 20 Minuten
Aluminum cardan drive shaft
Overheat protection
2.4 GHz radio system
Transmission ratio: 15:1
30° Steering angle (proportional)
Covered chassis and electronic parts
7.4V 1200mAh Li-Ion car battery
Radio battery: 3* AA batteries (not included)
Technical Specification:
Dimmension (L/W/H): 255 x 180 x 110 mm
Weight: 616 g (incl. battery)
Wheelbase: 165 mm
Ground clearance: 26 mm
Track width: 150 mm front / 150 mm rear
Wheel design: Sand Reef / 5 Spokes
Front wheels: Width 36 mm / Ø ± 65 mm
Rear wheels: Width 36 mm / Ø ± 65 mm
Dämpferöl Viskosität : n.a.
Shock spring force : Soft
Shock mounting size: 60 mm front / rear
Scope of delivery:
1/18 RC Car
2.4 GHz radio system
Car battery
USB charging cable
Manual with spare part list
Required accessories:
3x AA cells for radio
Frequently Asked Questions
The CR3.4 SHERPA is designed as a Ready-to-Run (RTR) model suitable for both beginners and experienced drivers aged 14+. It arrives fully assembled and ready to use, though you'll need to install three AA batteries in the radio controller before your first run.
The model includes a 7.4V 1200mAh Li-Ion battery and USB charging cable. For exact charge times, please refer to the manual, as this varies depending on your USB power source.
You receive the fully assembled 1:10 RC crawler, a 2.4GHz radio system, the 7.4V Li-Ion battery, a USB charging cable, and a manual with spare parts list. Note that three AA batteries for the radio controller are not included and must be purchased separately.
The CR3.4 measures 255mm long, 180mm wide, and 110mm high, with a wheelbase of 165mm—a compact 1:10 scale model that's easy to store and suitable for indoor use. It weighs 616g including the battery.
The CR3.4 reaches a top speed of 35km/h and delivers approximately 20 minutes of runtime per charge with the included 1200mAh battery. The 2.4GHz radio system provides a range of up to 60 metres.

Associated Silicone Diff Fluid 20000cst
Sp Rear Torque Rod Set Kyosho Inferno Mp10e -Aluminium
Centre Diff Mount Set Kyosho Inferno MP7.5-Neo (2)
Team Associated 16mm Front Springs Black 4.65lb/in L68 8.25t 1.5d
Team Associated Antenna Kit
Team Associated M3 X 3 Set Screws (10)
Team Associated Rc10 4wd Team Car Chassis, Black
Team Associated Silicone Grease Transmission
Rear Tires Kyosho EP Fantom 4WD (2)
Rear Damper Shaft/Piston Rage Ve (2)
Associated Prolite 4x4 Steering/Caster Blocks
BLACKZON Slyder ST Turbo Body (Green/Black)
Hobbywing Blue/White Decal Sheet
Team Associated Tc7 Shock Cap Retainers
Threaded Big Shocks Cap Inferno Mp9-Mp10 Mp11 (4) Aeration Type
Team Associated RC8B/RC8B3.1/RC8B3.2 Silver Ft Turnbuckle 4x50mm (1.97")
Carburettor O-Ring Kyosho KE21SP-KE25SP
Team Associated Rc10b84 Center Bulkhead, Diff
Team Associated Rc10gt Servo/ Receiver/Antenna Mount/Horn
Slipper Spring Set Outlaw Rampage
Aluminium Front & Rear Bumper Set Kyosho Mini-Z Buggy - Red
Body Mount Kyosho Inferno Mp9 Tki4
Rear Lower Suspension Holder Kyosho Inferno Mp9 - Front
Nylon Lock Nuts m3x4.3mm (5) Kyosho
Hobbywing Xerun Combo Xr10 Pro G3 BLK Esc + V10 G3 6.5T Motor