1:18 Micro PRO Crawler "Trail Hunter" Bright Sand RTR

Our 1:18 scale crawler in the PRO version can do more than some of its larger counterparts. With the “Performance Upgrade,” including portal axles front and rear, metal gears made of tool steel, 1.2″ tires, and a modified gear ratio for even more torque, it becomes a true crawler fun machine.

You don’t need much space, and the “playground” is quickly set up. For example, just toss a few cushions or objects on the floor, and the fun begins! Thanks to the proportional remote control, the finest driving maneuvers are possible, allowing the small crawler to navigate even the most complicated-looking obstacles.

**HIGHLIGHTS:**

– Portal axles front and rear
– Metal gears on front and rear axles
– 2.4GHz transmitter/receiver unit
– Lighting control via transmitter
– Oversized 1.2″ all-terrain tires with internal bead lock system
– Chassis-mounted 1kg steering servo with Panhard bar
– Water-resistant PPX4 electronics
– Metal chassis frame
– Painted 1.2mm Lexan body
– Tight turning radius of 80cm
– Driving time up to 45 minutes
– Steering angle up to 45°
– Ultimate ground clearance thanks to portal axles and 1.2″ tires

Due to its design, the “Trail Hunter” chassis probably has the highest ground clearance currently available on the market.

The battery box and power switch are located on the bed, so there is no need to remove the body for everyday use.

The standard front and rear lighting, consisting of headlights and taillights, is controlled directly from the transmitter by pressing the third channel multiple times.

A newly developed portal axle with a new gear ratio ensures smooth throttle response at low speeds and even more torque. The new axle also allows for a steering angle of up to 45°. The gears in the axles are made of tool steel, and the front axle is equipped with CVD drive shafts.

New super-soft 1.2″ “All Terrain” tires with internal bead lock design.

A simple, balanced, and easily accessible chassis layout with a high-performance drivetrain.

**FEATURES:**

– Scale: 1:18
– 4WD (all-wheel drive)
– 2.4GHz remote control system
– High torque transmission, 104:1 gear ratio
– 55T / 030 brushed motor
– Fully locked differentials (front & rear)
– Telescopic UJ drive shafts
– Metal chassis frame
– Drag/Mountain brake (prevents rolling downhill)
– Digital proportional control for precise driving maneuvers
– LED lighting
– Scale body with many accessories
– Bead lock wheels with super soft AT tires
– Waterproof 1kg mini steering servo
– 2-in-1 speed controller/receiver unit
– Driving time: approximately 45 minutes

**TECHNICAL DATA:**

– Extreme approach and departure angles (67.4° / 80.5°)
– Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50A
– Remote control: 2.4GHz, 4-channel
– Steering servo: 1kg force, waterproof
– Motor: 030 / 55T
– Gear ratio: 104:1
– Battery: LiPo 7.4V/2S 600mAh
– Battery connector: Molex 2-pin
– Wheelbase: 158.5mm
– Ground clearance: 43.7mm
– Track width: 110mm
– Length: 241mm
– Width: 125mm
– Height: 130.8mm
– Weight: 400g
– Wheels: 19.5x58mm

**INCLUDED:**

– 1* Mini PRO Crawler
– 1* 2.4GHz transmitter unit
– 1* LiPo battery 7.4V 600mAh
– 1* USB charging cable
– 1* Sticker sheet
– 1* Manual (DE/EN/FR)
– 1* Mini toolset

**REQUIRED ACCESSORIES:**

– 4* AAA batteries for the transmitter