GPM Racing 7075-T6 Alloy Front C Hub for Traxxas 1/8 Jato 4x4 VXL Brushless (TJ019)

Engineering notes for the TJ019 front C-hub

The TJ019 front C-hub is a machined 7075-T6 aluminium replacement for the front hub area on compatible TRAXXAS platforms. It is intended to minimise elastic deformation compared with polymer hubs, thereby improving steering geometry stability under high loads typical of aggressive driving and bashing scenarios.

Design attention was given to reinforcing the tie rod, knuckle and lower arm junctions to reduce movement at these interfaces. The result is a more repeatable steering response and reduced tendency for toe shift during impacts.

Installation uses existing front c-hub fasteners and factory mounting points. The part is categorised as an aftermarket upgrade for hobbyist tuning where improved rigidity and fitment consistency are required.

Packing includes

• Front C-Hub – 2pcs

Original Name / Part No:

9032

Compatible Models

• TRAXXAS 1/8 JATO 4X4 VXL BRUSHLESS-90386-4
• TRAXXAS 1/8 JATO 4X4 BRUSHLESS-90154-4
• TRAXXAS 1/10 Stampede 4X4 Brushless-67154-4
• TRAXXAS 1/10 FORD F-150 RAPTOR R-101076-4
• For use with #9080 upgrade kit: TRAXXAS 1/10 RUSTLER 4X4 VXL-67076-4
• TRAXXAS 1/10 4WD HOSS 4X4 VXL 3S-90076-4
• TRAXXAS 1/10 BIGFOOT 4X4 Brushless Officially Licensed Replica-67134-4
• TRAXXAS 1/10 Ford Fiesta ST Rally-74276-4
• TRAXXAS 1/10 Rustler 4X4 Brushless -67164-4
• TRAXXAS 1/10 Rustler 4X4 VXL-67376-4
• TRAXXAS 1/10 Rustler 4X4 Stadium Truck-67064-61
• TRAXXAS 1/10 Slash 4X4 VXL-68086-4
• TRAXXAS 1/10 Slash 4X4-68054-61
• TRAXXAS 1/10 Slash 4X4 Brushless-68154-4
• TRAXXAS 1/10 Slash 4X4 VXL EHD-68386-4
• TRAXXAS 1/10 Stampede 4X4 VXL-90376-4
• Suitable Model: TRAXXAS 1/8 JATO 4X4 VXL BRUSHLESS-90386-4
• TRAXXAS 1/8 JATO 4X4 BRUSHLESS-90154-4
• TRAXXAS 1/10 Stampede 4X4 Brushless-67154-4
• TRAXXAS 1/10 FORD F-150 RAPTOR R-101076-4

The TJ019 front C-hub is offered as a precision aluminium upgrade to enhance steering rigidity and maintain front-end geometry under demanding hobby use, fitting standard front suspension hardware for straightforward installation.

What is the intended benefit of 7075-T6 construction?

7075-T6 provides substantially higher static and fatigue strength than common plastics, reducing deformation at mounting interfaces and improving repeatable steering geometry.

Are any shims or spacers required for fitment?

The part is designed to use factory mounting points and hardware; shims are not normally required unless correcting for previous nonstandard modifications.

How many items are supplied per package?

Two front C-hubs are supplied, as indicated under Packing includes: Front C-Hub – 2pcs.

Does the anodised finish alter dimensional tolerances?

Anodising is a thin surface treatment and does not materially alter the part’s design dimensions or fit when applied within normal industrial tolerances. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.