GPM Racing Aluminium Servo Mount for Losi 1/6 Super Baja Rey 4x4 (SB024)

Precision CNC servo mount for Super Baja Rey

This 11pcs aluminium servo mount set is engineered for Team Losi SUPER BAJA REY fitments, providing a rigid interface between the main chassis and sub chassis. The assembly uses a machined aluminium component with stainless steel fasteners to replace the stock brackets and reduce compliance at the servo mounting point.

Functionally the mount transfers steering loads into the chassis stack with reduced deformation, helping to preserve servo trimming and improve steering consistency under dynamic loads. Reference manual: LOS251059 for alignment and orientation notes.

Fitting guidance: locate the mount so the screw holes match chassis bosses, thread screws by hand to confirm engagement, and torque incrementally to avoid misalignment. Verify spline engagement and servo horn orientation prior to final torque. Note that the aluminium mount increases local stiffness and may require clearance checks around nearby components after installation.

Specifications

• Item Servo mount set, 11 pcs (1 servo mount, 4x 4×10 round head screws, 6x 4×14 flat head screws)
• Material Aluminium
• Model Number SB024
• Compatibility Team Losi SUPER BAJA REY

A CNC-style aluminium option for improved servo support and cleaner load paths on the Super Baja Rey chassis, supplied with stainless fasteners for secure attachment.

This item is compatible with

• TEAM LOSI Super BAJA REY 4X4

What torque should I use on the 4×10 and 4×14 screws?

Use a light to medium torque appropriate for small stainless fasteners, tightening incrementally and avoiding over torque to prevent chassis boss damage; a small torque driver or careful hand tightening is advised.

Does the mount alter chassis flex characteristics?

Yes, the aluminium mount increases stiffness at the servo mounting area which can modify local chassis flex; validate handling and component clearance after fitting.

Are the supplied screws stainless steel?

The kit lists stainless steel fasteners for both the 4×10 round head and 4×14 flat head screws to provide corrosion resistance and secure attachment.

How should I verify servo spline engagement after fitting?

Before final torque, confirm the servo spline fully engages the horn and that the horn returns to neutral without binding; adjust spline position or horn orientation if necessary. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.