GPM Racing Hardened Steel+Aluminum Front+Rear Adjustable CVD Drive Shaft - 8pcs Set for Traxxas 1/10 MAXX (TXMS3F/RSA/2)

Adjustable front and rear CVD drive shafts for MAXX

This TXMS3F/RSA/2 set is a precision-engineered, RC-scale front and rear drive shaft upgrade intended for the TRAXXAS MAXX MONSTER TRUCK. The kit replaces cross-head style half-shafts with CVD swing joints to deliver a more consistent torque path under load while maintaining a lightweight assembly compatible with hobby model axles.

The configuration utilises hardened steel at the joint interfaces coupled with 6061-T6 aluminium bodies to provide a balanced combination of contact durability and reduced rotating mass. The adjustable bodies permit fine trimming of suspension geometry to minimise binding during travel, and the supplied screw pins retain the CVD assemblies on the existing axle interfaces.

Installation overview: the kit is designed for direct replacement where stock spline and pin locations match; install requires disassembly of the wheel hubs and drive components and fitting the included pins to secure the CVD elements. After assembly, verify free rotation through suspension travel and re-check torque on all fasteners prior to operation.

Packing includes

• CVD – 4pcs
• 4×2.5×17 Screw Pin – 4pcs

Specifications

• Item: Front and Rear Adjustable CVD Drive Shaft – 8pcs set
• Material: Hardened steel joints, 6061-T6 aluminium bodies
• Model Number: TXMS3F/RSA/2
• Compatibility: TRAXXAS MAXX MONSTER TRUCK

Engineered for reliable aftermarket performance, this set pairs hardened joint surfaces with 6061-T6 aluminium bodies to enhance driveline durability and reduce binding in aggressive RC use.

What are the critical measures to confirm before fitting?

Confirm axle spline profile, pin hole spacing and hub clearance on your MAXX; the TXMS3F/RSA/2 kit installs as a direct swap only when these dimensions match the vehicle interfaces.

Which maintenance checks preserve service life?

Regular inspection of the screw pins and joint faces, removal of ingress debris and periodic lubrication of moving surfaces will extend component life and maintain smooth operation.

Are replacement pins or joint parts available?

Replacement screw pins and joint components should be ordered to the original part dimensions; retain the kit part numbers and consult your supplier for compatible spares that match TXMS3F/RSA/2 items.

How do adjustable bodies help setup?

Adjustable bodies allow small angular and length corrections to reduce driveline stress and eliminate binding through the suspension arc, improving overall torque transfer during dynamic use. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.