GPM Racing Stainless Steel Tie Rod+25T Servo Horn&steel F+R Adjustable CVD Drive Shaft - 20pcs Set for Traxxas 1/10 MAXX (TXMS1625123)

Precision steering and driveline upgrade for MAXX

This 20-piece aftermarket assembly is engineered for Traxxas MAXX applications where improved steering link strength and reliable CVD power transfer are required. The kit groups CNC-friendly aluminium hardware and stainless steel link elements to provide durable, serviceable steering and driveline components without altering stock mounting geometry.

Material and mechanical choices prioritise long term performance and ease of maintenance: tie rods and critical fasteners are stainless steel for corrosion resistance and predictable wear, while the 25T servo horn is machined from 6061-T6 aluminium to maintain torsional stiffness at low mass. The adjustable CVD swing joints give consistent torque transmission compared to traditional pin-based joints, improving driveline response under high load.

Assembly notes for technicians: adjust tie rod length via the positioning hole using a small tool, turning against the clockwise/counterclockwise thread pattern to achieve precise toe and knuckle alignment. Confirm servo spline geometry matches the 25T horn before final installation. The CVDs mount into the vehicle’s existing drive cups and secure with the supplied screw pins and screws for reliable retention.

Packing includes

• Steering Tie Rod – 2pcs
• Servo Tie Rod – 1pc
• Servo Horn (25T) – 1pc
• CVD Drive Shaft – 4pcs
• Stainless Steel Round Head Screw 3×22 – 2pcs
• Stainless Steel Round Head Screw 3×18 – 2pcs
• Stainless Steel Round Head Screw 3×16 – 1pc
• Stainless Steel Round Head Screw 3×14 – 2pcs
• Stainless Steel Cap Head Screw 3×12 – 1pc
• Screw Pin 4×2.5×17 – 4pcs

Original Name / Part No:

8947+8948+8950

Specifications

• Item: Stainless steel tie rods, 25T aluminium servo horn, front and rear adjustable CVD drive shafts, assorted screws and pins, 20pcs set
• Material: Stainless steel components and 6061-T6 aluminium servo horn
• Model Number: TXMS1625123
• Compatibility: TRAXXAS MAXX MONSTER TRUCK

For precision-minded hobbyists and technicians seeking CNC-style aluminium control hardware and stainless link durability on Traxxas MAXX platforms; verify spline and cup interface compatibility before fitting.

What spline interface is required for the servo horn?

The servo horn uses a 25-tooth spline interface. Use a servo with a matching 25T output for correct engagement and minimal spline play.

How are tie rod adjustments performed?

Length is adjusted by inserting a small tool into the positioning hole and rotating the rod on the threaded section to achieve precise toe and knuckle arm angles.

What mounting hardware is included for the CVDs?

The kit supplies screw pins and assorted screws required to secure the CVDs to standard drive cups; inspect the fitment and torque during initial assembly.

Which parts are stainless steel?

Critical linkage elements and most external fasteners are stainless steel to reduce corrosion and preserve fitment over time. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.