GPM Racing Aluminium Servo Mount +Aluminum Tie Rod+25T Aluminium Servo Horn for Traxxas 1/10 MAXX (TXMS024A)

Precision aluminium servo mounting and linkage for TRAXXAS MAXX

This aftermarket assembly replaces the stock servo mounting on TRAXXAS MAXX 1/10 Monster Truck platforms to accept larger-format servos of the same mounting specification such as 2075x-style units. The kit focuses on the steering system by relocating and rigidly securing the servo, supplying a CNC-friendly aluminium tie rod, and providing a 25T aluminium servo horn to maintain precise linkage geometry under load.

Installation is a direct-replacement style upgrade for the designated MAXX chassis, using the included fasteners and shims to set servo height and horn position. The aluminium components offer stiffer mounting compared with typical moulded parts, which helps reduce flex at the servo interface and keeps steering inputs more consistent when tuning end-point and steering rate.

In tuning terms this kit is useful when switching to a heavier, higher-torque servo: it preserves correct horn offset and tie rod alignment so steering trim and dual-rate adjustments behave predictably, and it simplifies preserving consistent Ackermann and toe while experimenting with servo centring and horn positions.

Packing includes

• Servo mount – 1pc
• Aluminium tie rod – 1pc
• Aluminium servo horn – 1pc
• Stainless steel flat head screw 3×8 – 2pcs
• Stainless steel round head screw 3×8 – 3pcs
• Stainless steel round head screw 3×14 – 2pcs
• Stainless steel cap head screw 3×10 – 1pc
• 3mm counter sink shims – 2pcs
• 3×7.5×2 Alloy shim – 3pcs
• Stainless steel washer 3*5.4*1 – 1pc
• Cap head screw 2×6 – 1pc

Compatible Models

• TRAXXAS-1/10 4WD MAXX MONSTER TRUCK -89076-4

For precision-oriented builders moving to a higher-torque servo or seeking a firmer servo-to-chassis interface on the TRAXXAS MAXX platform, this aluminium mount and linkage set provides a straightforward hardware upgrade that supports consistent steering geometry during tuning.

What components are supplied for mounting and alignment?

The kit supplies the aluminium servo mount, aluminium tie rod, 25T aluminium horn plus the stainless steel screws, shims and washer required to set servo height and horn position as listed in the Packing includes section.

How does the aluminium mount affect steering geometry under load?

The stiffer aluminium interface minimises flex at the servo mounting points, which helps maintain intended horn offset and tie rod alignment so endpoint and dual-rate settings remain repeatable during dynamic use.

Are there recommended checks after installation?

After fitting, verify servo centring, confirm horn angle and check tie rod length; torque all fasteners to spec and recheck after initial running to ensure alignment is stable. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.