GPM Racing Aluminium Wheel Hub Hex (+10mm) for Traxxas 1/10 MAXX (TXMS10/+10/2)

Precision aluminium wheel hub hex for TRAXXAS MAXX

This 16 piece upgrade is engineered for TRAXXAS MAXX MONSTER TRUCK applications and CNC machined from aluminium 6061 T6 for consistent geometry and fit. The design increases hex face thickness and offsets the wheel centreline by +10mm to alter roll behaviour and lateral stability while maintaining RC-specific fit and function. Hex recesses are machined to seat the wheel firmly, and torque is transferred from the CVD to the wheel assembly using the supplied pins, screws and shims for reliable engagement under load.

The component set is intended as a tuning item to adjust the chassis footprint: a +10mm offset provides a measurable change in handling characteristics, improving tyre support and cornering predictability for tuned setups and heavier tyre choices.

Assembly guidance: the kit contains the required pins, screws and shims to mount the hex to the wheel and secure the assembly to the drive system. Parts are produced to integrate with original wheel hubs and CVD interfaces; inspect mating surfaces and torque hardware to recommended values during installation.

Packing includes

• Wheel Hub Hex – 4pcs
• 2.5×14.7 Pin – 4pcs
• Stainless Steel Hex Socket Screw 6.5*20.5mm – 4pcs
• Stainless Steel Shims 6.5mm – 4pcs

Original Name / Part No:

Connecting the CVD to the wheels in order to transfer the power and lead a smooth drive.

Specifications

• Item: Aluminium Wheel Hub Hex (+10mm) – 16pcs set
• Material: Aluminium 6061 T6
• Model Number: TXMS10/+10/2
• Compatibility: TRAXXAS MAXX MONSTER TRUCK

A precision GPM upgrade for TRAXXAS MAXX owners who need a robust +10mm track-width solution; the TXMS10/+10/2 set is CNC-finished for reliable fit, consistent torque transfer and improved chassis footprint control.

This item is compatible with

• TRAXXAS-1/10 MAXX MONSTER TRUCK-89076-4

What exact components are supplied for assembly?

The kit supplies four machined aluminium wheel hub hexes, four 2.5×14.7 pins, four stainless steel 6.5×20.5 hex socket screws and four 6.5mm stainless shims as listed in the packing section.

How should I verify CVD engagement and wheel clamping?

Install hexes and fasteners lightly, rotate assembly to check concentricity and CVD seating, then torque hardware in stages while rechecking alignment to ensure correct torque transfer.

Are there recommended maintenance checks for aluminium hexes?

Periodically inspect hex faces and fasteners for wear, ensure pins and screws remain tight, and replace parts showing deformation to retain reliable drivetrain engagement.

Will the TXMS10/+10/2 affect suspension geometry?

The +10mm offset changes track width which can alter steering leverage and suspension track; verify steering throw, tie rod clearance and wheel arch clearance after installation. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.