GPM Racing Aluminium 7075 Front C-Hubs for Traxxas 1/10 MAXX (TXMS019N)

7075 aluminium front C-hubs engineered for MAXX

Precision 7075 aluminium front C-hubs developed to mount on the front knuckles of TRAXXAS 1/10 MAXX monster truck kits. The design focuses on rigid support and consistent steering geometry for tuning and performance-oriented setups.

Delrin collars are pressed into the hub bores to reduce play at the king pin interface and to limit frictional wear. Supplied stainless steel king pins offer improved resistance to corrosion and maintain smooth pivot action in varied environments.

Functionally these C-hubs stabilise knuckle movement so steering inputs translate with improved predictability, assisting accurate adjustments to caster, toe and Ackermann during track-side or workshop tuning.

Packing includes

• Front c-hubs – 2pcs
• King pin – 4pcs

Original Name / Part No:

Part Location:Front c-hubsProduct major function & usage:Stabilize knuckle arms in order to rotate smoothly.

Compatible Models

• TRAXXAS-1/10 4WD MAXX MONSTER TRUCK -89076-4
• TRAXXAS-1/10 4WD MAXX W/WIDE MAXX MONSTER TRUCK-89086-4

Direct-fit replacement for the listed TRAXXAS MAXX front knuckles; install with the supplied hardware and verify steering and suspension clearances before final torque. Recommended for hobbyists seeking a more stable knuckle mount during aggressive driving and setup work.

What benefits do 7075 hubs provide over stock parts?

7075 aluminium offers higher yield strength than common plastics, improving stiffness and repeatable steering geometry under heavy loads.

How do the Delrin collars affect service intervals?

Delrin collars reduce metal-on-metal contact and can extend service intervals; inspect them during routine maintenance and replace if excessive wear is observed.

Are these hubs compatible with wide MAXX variants?

Yes, the compatibility listing includes both standard and wide MAXX variants as shown in the compatibility box above.

Installation tips for a precise fit?

Use the supplied king pins, check hub bore alignment and ensure steering and shock clearances are free before final tightening to secure accurate geometry. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.