GPM Racing 7075-T6 Alloy Servo Steering Link Adjustable Length/Spring Force for Losi Team Losi 1/8 LMT 4WD Solid Axle Monster Truck (LMT162)

Precision steering link for LOSI LMT chassis

This precision-engineered servo steering link is designed for LOSI LMT 4WD solid axle monster truck platforms and carries the part number LMT162. CNC machined from 7075-T6 aluminium, the component offers tight dimensional tolerances and a hardened interface between servo horn and steering knuckles while maintaining the original LMT-series mounting pattern.

The link provides an adjustable centre length of 100 to 113mm and a dual-direction spring force adjustment that enables controlled force-relief calibration. The spring mechanism is intended to protect the servo under impact by allowing a predictable breakaway load, reducing transmitted peak torque and limiting gear stress.

Assembly uses the provided Grade 12.9 fasteners and 3.0 lock nut; technicians should confirm neutral horn position, verify link length against wheel alignment, and set spring pre-load to achieve the desired breakaway threshold. For setup, increase preload to tighten steering response where stall load is acceptable, or decrease preload to prioritise servo survivability.

Packing includes

• Servo Steering Link – 1pcs
• Grade 12.9 Black Round Head Screw 3×28 – 1pcs
• Grade 12.9 Black Round Head Screw 3×14 – 1pcs
• 3.0 Lock nut – 1pcs

Compatible Models

• LOSI 1/8 LMT 4WD SOLID AXLE MONSTER TRUCK-LOS04022
• LOSI 1/8 LMT 4WD SOLID AXLE MONSTER TRUCK-LOS04021
• LOSI 1/10 TLR TUNED LMT 4WD SOLID AXLE MONSTER TRUCK KIT-LOS04027
• LOSI 1/8 LMT 4WD SOLID AXLE MEGA TRUCK BRUSHLESS-LOS04024
• LOSI 1/8 LMT 2.0 Grave Digger 4X4 Solid Axle Brushless Monster Truck-LOS04028

As an aftermarket upgrade, the LMT162 steering link focuses on precision fit, CNC-machined durability and a tunable force-relief system for LOSI LMT chassis; follow correct setup procedures to optimise performance and servo protection.

What hardware is included for installation?

Package contents include the servo steering link, two Grade 12.9 black round head screws (3×28 and 3×14) and a 3.0 lock nut for secure assembly.

Exact fitment for which LOSI models?

Refer to the Compatible Models block above for detailed LOSI kit codes that the LMT162 is engineered to match.

How should the spring preload be validated?

Validate preload by incrementally adjusting the spring and conducting impact tests at low speed; record the breakaway load that protects the servo without compromising required steering rigidity.

Are there recommended inspection intervals?

Inspect threaded joints and spring mechanism after aggressive runs, re-torque fasteners and check for wear at adjustment threads to maintain long-term reliability. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.