GPM Racing GPM 4TEC 2.0 VXL Complete Competition Set for Traxxas 1/10 Ford GT 4-Tec 2.0 (TEC2VXLKIT)

Precision alloy competition upgrade for TRAXXAS 4-TEC

This TEC2VXLKIT is an engineered aftermarket package for TRAXXAS 1/10 4WD GT4 and 4-TEC on-road chassis, consolidating CNC-style alloy differential housings, machined aluminium suspension mounts, hardened CVDs and high speed cooling fans to increase structural stiffness and thermal management for race use.

Components are intended for TRAXXAS 4-TEC 2.0 and 3.0 based platforms and serve as tuning and durability improvements rather than modifying basic suspension geometry. Installation requires removal of stock drivetrain and suspension parts; verify fitment and clearances and use standard RC tooling for accurate assembly.

Packing includes

• 7075 Alloy Front Differential Housing – 1pcs
• Alloy 7075 Rear Differential Housing – 1pcs
• Aluminium 7075 Motor Mount Plate With Heat Sink Fins – 1pcs
• Aluminium Front C Hubs – 1pcs
• Aluminium Front Knuckle Arm – 1pcs
• Aluminium Rear Knuckle Arm – 1pcs
• 7075 Alloy Servo Mount – 1pcs
• Aluminium Front Shock Towers – 1pcs
• Aluminium Rear Shock Towers – 1pcs
• Aluminium Steering Assembly – 1pcs
• Aluminium Front Suspension Arms – 1pcs
• Aluminium Rear Suspension Arms – 1pcs
• 6061 Alloy Front (58mm)+Rear (60mm) Oil Filled Ultra Shocks – 1pcs
• Aluminium Servo Saver With Aluminium Steering Link – 1pcs
• #45 Harden Steel Rear CVD – 1pcs
• #45 Harden Steel Front CVD – 1pcs
• 4140 Carbon Steel + 7075 Alloy Front & Rear Complete Differential – 1pcs
• 6061-T6 Alloy High Speed Cooling Fan 18000 RPM Compatible With 36mm Motor – 1pcs
• 6061-T6 Alloy ESC High Speed Cooling Fan 20000 RPM (BL-2S: 3383 And Velineon VXL-3S: 3355R) – 1pcs

Compatible Models

• TRAXXAS 1/10 4WD FORD GT 4-TEC 2.0-83056-4
• TRAXXAS 1/10 4-TEC 3.0 CORVETTE STINGARY-93054-4
• TRAXXAS 1/10 4-Tec 3.0 Toyota Supra BL-2s-93164-4
• TRAXXAS 1/10 4-Tec 2.0 BL-2s Chassis On-Road Cars-83124-4
• TRAXXAS 1/10 4-Tec 2.0 VXL Chassis On-Road Cars-83076-4

For precision-focused builders and club competitors, the TEC2VXLKIT groups machined alloy components and dedicated cooling to reduce flex and thermal drift, simplifying a track-grade upgrade path.

What machining tolerances should I expect from the alloy parts?

Components are specified as precision alloy parts intended to offer tighter mounting tolerances than stock plastic, but verify individual part mating points and run a trial assembly to confirm alignment.

Are the supplied CVDs compatible with standard 4-TEC splines?

The kit lists #45 hardened steel CVDs designed as direct replacements for common 4-TEC drive interfaces; confirm spline count and length during mock installation to avoid surprises.

What cooling performance gains are realistic with the included fans?

High speed 6061-T6 alloy fans improve airflow over motor and ESC assemblies; actual temperature reductions depend on airflow path, mounting and ambient conditions so measure temperatures after installation.

Should I change differential oil when fitting the new diffs?

Inspect and set diff oil to your preferred spec when assembling the 4140/7075 differentials to tune traction and centre bias for track conditions.

What basic tools and supplies are recommended?

A full set of hex drivers, screwdrivers, pliers and threadlocker are recommended; keep spare fasteners and measure torque settings to prevent distortion of machined mounts. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.