GPM Racing Aluminium Motor Heatsink with Cooling Fan - 1 Set (For Slash 4x4 Lcg Version) for Traxxas 1/10 Slash 4x4 Lcg (SLA018FANLCG)

Precision aluminium motor cooling solution for TRAXXAS Slash 4×4 Lcg

This CNC-inspired aluminium motor heat sink with an integrated axial fan is a precision aftermarket cooling component for the TRAXXAS Slash 4×4 Lcg layout. The machined fins and dedicated fan are intended to promote consistent airflow across the motor can, aiding thermal management during prolonged high-load operation.

Engineered as a mechanical cooling upgrade, the unit helps mitigate thermal buildup that can impact torque output and motor longevity. Cooling effectiveness is determined by the chosen mounting position, the chassis airflow path, and secure electrical and mechanical installation of the fan assembly.

Installation guidance: confirm radial and axial clearance around the motor can, pinion and spur gear, and any close chassis features prior to fitting. Use existing motor mounting points when possible, ensure fan cabling is routed away from moving drivetrain parts, and verify fan rotation and airflow direction during bench testing before final assembly.

Specifications

• Item: Aluminium motor heat sink with cooling fan, 1 set
• Material: Aluminium
• Model Number: SLA018FANLCG
• Compatibility: TRAXXAS Slash 4×4 Lcg Version

When mounted with attention to clearance and airflow, this aluminium sink and fan assembly is a practical precision upgrade to control motor temperatures on the Slash 4×4 Lcg platform.

This item is compatible with

• TRAXXAS SLASH 4X4 LOW CG
• TRAXXAS TRX4 Defender Trail Crawler
• TRAXXAS FORD GT4-TEC 2.0

What motor can diameters are supported?

Measure your motor can diameter and compare to the sink inner diameter before purchase; the design accommodates common Slash 4×4 Lcg motor sizes but exact fit depends on your chosen motor model.

Recommended method to power the fan?

Use a regulated 5-12V source matching the fan specification, ideally from an ESC fan output or a small UBEC, and secure connections with heatshrink or proper connectors to prevent voltage drops.

Any tips to avoid gearbox interference?

Position the sink to maintain safe distance from the pinion and spur, rotate the drivetrain while checking for contact, and if needed use shims or alternate motor spacing to preserve correct gear mesh. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.