GPM Racing 7075-T6 Alloy Front & Rear Suspension Arms Kit for Arrma 1/16 Mini Kraton 3S Dsc 4x4 RTR Brushless Speed Truck (MAKM4567)

Aftermarket front and rear suspension arms for Mini Kraton 3S

This aftermarket kit replaces the factory front and rear suspension arms on Arrma Mini Kraton 3S RC trucks using part numbers ARA-2674 and ARA-2675, and is supplied as an upgrade for Mini Kraton 3S models. The components are machined from 7075-T6 aluminium and anodized to resist corrosion and wear while maintaining structural rigidity expected in aggressive off-road use.

The kit includes upper and lower arms for both axles and associated fasteners so the set can be fitted as a direct replacement of the OEM arms. Because the parts are metal, installers should check clearances against shocks, steering linkages, and hub carriers during trial fitting. The arms serve a tuning role by offering a stiffer mounting point for the suspension, which can affect handling balance and response when adjusting shock valving or roll-center settings.

Packing includes

• Front Upper Suspension Arms – 2pcs
• Front Lower Suspension Arms – 2pcs
• Grade 12.9 Black Cap Head Screws 2.5×12 – 2pcs
• Rear Lower Suspension Arms – 2pcs
• Grade 12.9 Black Cap Head Screws 2.5×10 – 2pcs
• Rear Upper Suspension Arms – 2pcs

Original Name / Part No:

ARA-2674+ARA-2675

Compatible Models

• Arrma 1/16 Mini Kraton 3S DSC 4X4 RTR Brushless Speed Truck-ARA2508S
• Arrma 1/16 Mini Kraton 3S DSC 4X4 RTR Brushless Speed Truck-ARA2508

Fit using standard maintenance practice: secure bolts to the correct torque, confirm suspension pivot spacing is consistent left-to-right, and inspect bearings and hubs that interface with the arms. These aluminium arms are intended as a durable replacement and a base for chassis setup adjustments rather than a change to electronics or drivetrain components.

Is this a direct OEM replacement for ARA-2674 and ARA-2675?

Yes, the kit is intended to replace the factory part numbers ARA-2674 and ARA-2675 on compatible Mini Kraton 3S chassis.

What material are the arms made from?

The arms are machined from 7075-T6 aluminium and come with an anodized finish for improved wear and corrosion resistance.

Which Arrma models are compatible?

Compatibility is listed for Arrma 1/16 Mini Kraton 3S DSC 4X4 RTR Brushless Speed Truck models ARA2508S and ARA2508; verify your model and part numbers before purchase.

Any setup adjustments needed after installation?

After installation check steering and suspension geometry, verify there is no binding, and re-tighten fasteners to spec. No electronic changes are required. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.