GPM Racing Aluminium 13mm Hex Adapters-6pcs Set for Team Corally 1/10 Sketer XL4S (SKE010/+13MM)

13mm hex adapters designed for SKETER XL4S

This 13mm hex adapter set is intended for the TEAM CORALLY SKETER XL4S chassis and is identified as model SKE010/+13MM. The adapters mount between the knuckle arms and the wheels to provide increased wheel spacing without modifying hub or axle geometry.

The adapters include multiple threaded holes to enable selectable offset positions, allowing incremental track width adjustments. Changing the track width can enhance vehicle stability along straights and influence cornering characteristics for different surfaces or driving styles.

Fitting tips: fit the adapters at the wheel hub interface, secure with the supplied screws, and confirm wheel runout and clearance after installation. These adapters are an aftermarket 1/10 scale SKETER XL4S accessory and should be checked for proper fit before running.

Package contents: Hex Adapter – 2pcs, M4x3x15 Screw Shaft – 2pcs, M4x2.5×15 Screw Shaft – 2pcs, original part number C-00180-329.

Compatible Models

• TEAM CORALLY 1/10 SKETER XL4S BRUSHLESS MONSTER TRUCK-C-00191

Will these fit the SKETER XL4S hubs as listed?

They are produced for the listed SKETER XL4S specification; always verify your hub dimensions and wheel hex before completing installation.

How flexible are the offset choices on these adapters?

The multiple threaded holes allow a variety of offset combinations so you can experiment with small incremental changes to track width for handling refinement.

Exactly what hardware is supplied with the adapters?

The package lists two hex adapters plus four screws: M4x3x15 (2pcs) and M4x2.5×15 (2pcs), with the original reference C-00180-329. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM’s factory, so please allow around 14 days for dispatch.