Maverick

Maverick QByte XB Flux 1/12 Brushless RTR Off-Road Buggy - Red (with Battery & Charger)

$165.83
In Stock — ships today
SKU 151401
🚚 Calculating…
24hr or 48hr delivery — choose at checkout ✓ Free delivery on orders over £129.99
🚚 Calculating…
24hr or 48hr delivery — choose at checkout ✓ Free delivery on orders over £129.99

Key Specs

📐
Scale
1/12
⚙️
Motor
Brushless
🔨
Build State
RTR
🔄
Drive
4WD Shaft Drive
Top Speed
38km/h
🔋
Battery
2S / 1,600mAh
📡
Radio
2.4GHz
🚗
Vehicle Type
Buggy
📏
Wheelbase
228mm

About this product

Bold in red and capable from the first run, the Maverick QByte XB Flux is a 1/12 brushless buggy built for drivers who want proper off-road performance without a steep build curve. Shaft-driven 4WD, a 2845 3800KV brushless motor and the MSC-4516-BL ESC deliver 38kph (24mph) on the included 2S LiPo — everything needed is in the box.

The buggy silhouette sets the XB apart from the SC: lower overall height (97mm vs 139mm), a race-derived bodyshell profile, and geometry that stays planted during cornering. On a loose dirt track, the XB rewards committed driving — predictable understeer rather than sudden snap, and all-terrain tyres with enough bite to put power down on corner exits.

8.5mm aluminium shock towers front and rear are one of the XB’s standout specifications. Paired with oil-filled aluminium coilover shocks, these towers handle crash loads without flexing — a meaningful step up from the moulded plastic towers typical of budget buggies. Sintered steel gear differentials and a sintered steel spur gear complete a drivetrain built for repeated use.

The polycarbonate bodyshell comes with body clips pre-attached to the shell, so the XB never leaves them behind on the track. Splashproof electronics extend running conditions to damp grass and muddy trails without risk.

  • 1/12 scale 4WD shaft-driven off-road buggy
  • MSC-4516-BL brushless ESC with 2845 motor (3800KV) — 38kph/24mph on 2S
  • 8.5mm aluminium shock towers (front & rear)
  • Aluminium oil-filled threaded coilover shocks
  • Sintered steel gear differentials front & rear, sintered steel spur gear
  • Metal driveshafts
  • Independent double wishbone suspension
  • Dual point bell crank steering with servo saver
  • Gear cover protecting spur gear from debris
  • Polycarbonate Lexan bodyshell with body clips attached to shell
  • Splashproof electronics
  • MRX-314 2.4GHz 4-channel receiver & MTX-314 transmitter
  • 7.4V 1600mAh LiPo battery pack & 7.4V USB charger included
  • Dimensions: 334 × 202 × 97mm | Wheelbase: 228mm

Maverick part number: MV151401


Before we chat…

Please add your email so we can reply later if we are offline or dealing with another customer.

Please enter a valid email address.