Team Associated Mt12 Monster Van Bodyshell Set Clear 
Team Associated B6 Range Ball Differential Kit (Caged Race) 
HPI Racing Causeway Tire 111-43mm /W Insert (2pcs) 
Maverick RC Upper Suspension Arms Front 2 PCS (Blackout MT) 
Team Associated Rear Turnbuckle Silver M3x35 (1.375") 
HPI Racing Body Pin (Large)(20Pcs) 
HPI Racing Tie Rod Set 
Maverick RC Front Axle Shaft (2pcs) 
HPI Racing BMW M3 GT2 (E92) Body (200mm) 
BLACKZON USB Battery Charger (3S) 
HPI Racing Aluminum C Hub Set (Hard Anodized) 
Maverick RC BLACKOUT XB 2013 CLEAR BODYSHELL 
HPI Racing Aluminium Threaded Pinion Gear 19T X 12Mm (1M) 
HPI Racing Lp29 Wheel Yokohama Avs Model T6 Chrome (2Pcs) 
HPI Racing Steering Nut 3Mm (4Pcs) 
Maverick RC Shock Parts Set (Blackout MT) 
HPI Racing Steering Turnbuckle 4X55Mm (2Pcs) 
Blackzon Smyter Db 1/12 4wd Electric Desert Buggy - Green 
HPI Racing Lock Nut M2 (Black/4pcs) 
HPI Racing Ford Mustang Mach-E 1400 Body Accessory Set 
Maverick RC 12mm Wheel Hex Hub Set (4pcs) 
HPI Racing Vented 2Mm Brake Disc (Pr) 
HPI Racing Toyota Hilux SR5 Painted Body - Black 
Maverick RC REAR WING - BLACK (XB) 
HPI Racing Baja Shock Oil 35W (100Cc) 
HPI Racing Throttle Linkage Set 
BLACKZON Spare Wheel Mount 
HPI Racing Rear Brace (Purple) 
HPI Racing Step Screw 3X25Mm (2Pcs) 
Maverick RC Servo Saver Set 
Maverick RC Rear Lower Susp. Arm Strada XB/SC and EVO XB/SC 
HPI Racing HPI TF-51 TRANSMITTER 
Maverick RC Assembled Bodyshell (Red) 
HPI Racing Gear Box Set 
Maverick RC Servo Link Ball 8mm 4 PCS 
HPI Racing Air Filter Sleeve Set (For #15411) 
Temperature Sensor for Rx461/Rx462 
HPI Racing Sport 3 Porsche 911 GT3 RSR Falken - Flux 
Team Associated Factory Team Power Tool 2.5mm Standard Tip 
HPI Racing Suspension Arm Set 
HPI Racing MONSTER KING FORD BRONCO BIG KAHUNA 
HPI Racing Rear Gear Box Set 
Rlaarlo Parts: 19T Pinion Gear, 48P For terminator 
Maverick RC Aluminium Rear Shock Tower (Grey) 
HPI Racing Plazma 11.1V 450mAh 35C LiPo Battery Pack 
FTX Banzai Treaded Tyre on 6-Spoke Wheel (2) - Black 
Associated Factory Team Dual Turnbuckle Wrench 
HPI Racing Centre Gear Box Shaft Set 
HPI Racing Centre Top Deck Bullet Flux 
HPI Racing Nano-TTR 1989 BMW M3 E30 Ravaglia - DS - Car Only 
HPI Racing Nissan Skyline R34 Gt-R Body (200Mm) 
HPI Racing Nano-TTR 1989 BMW M3 E30 Ravaglia - Red - Car Only 
FTX Vantage Front Buggy Tyre Mounted on Wheels (Pr) - White 
HPI Racing Aluminum Quadra Clutch Shoe/Spring Set 
HPI Racing Pin 1x5mm (10pcs) 
Etronix Pulse Ex4g 4ch 2.4ghz FHSS Wheel Radio System 
Etronix Deans 3s Battery Harness for 3 Packs in Series 
1:10 Wheel Set "Monster Sand Wheels" white (2) 
Etronix Powerpal Eh Balance Adaptor Board (Without Lead) 
Etronix Pulse GFSK 2.4ghz Antenna (Et1060) 
Joysway 9g Rudder Servo 
Fastrax m0.6 16t Aluminium 7075 Pinion Gear 
Etronix Pulse FHSS Receiver W/Gyro 2.4ghz for Et1132 
-
Velocicell 2S 50C 5500mAh high…
× 1
-
RC Battery Charger APC-1 (UK…
× 1
-
Velocicell 2S 50C 5500mAh high…
× 1
-
RC Battery Charger APC-1 (UK…
× 1
Key Specs
About this product
Experience a significant leap forward in off-road performance with the Kyosho Rage 2.0 4WD Fazer MK2, a thoroughly evolved 1/10 scale RC car that builds upon the original’s legendary value whilst delivering substantially improved driving dynamics. This electric radio controlled car features a revolutionary chassis design crafted from lightweight impact-resistant nylon, incorporating strategic front and rear stiffeners to maximise rigidity whilst minimising part count. The result is a simplified construction that reduces maintenance demands without compromising on-track performance. The low centre of gravity, deckless chassis design works in perfect harmony with big bore oil shocks to absorb impacts effectively during aggressive off-road driving. Whether you’re navigating technical terrain or pushing hard on open ground, the carefully optimised front-to-rear geometry provides the ideal balance between responsive handling and precise control that serious RC hobbyists demand.
This ready to run RC car arrives fully assembled and electronics-ready, eliminating the need for complex setup procedures. Powering this 1/10 radio controlled truck is a Kyosho 550 Class G14L brushed motor paired with a capable 60A electronic speed controller compatible with both NiMh and 2S LiPo batteries. The fixed gear mesh motor mount accepts pinion settings from 21T to 29T, offering impressive tuning flexibility without requiring adjustment tools. The shaft-driven 4WD system utilises 2-bevel grease-filled differentials front and rear, combined with full ball bearings throughout to minimise friction and drive loss. This electric RC car UK enthusiasts can trust includes the Syncro KT-231P+ 2.4GHz transmitter with adjustable throttle trim, steering trim, throttle EPA, and dual rate controls. The striking American Rock Racer-inspired bodywork arrives pre-painted with decals applied, ready for immediate use. As a quality Kyosho radio controlled model, it represents exceptional value within the competitive RC hobby UK market.
- 1/10 scale 4WD electric RC car with shaft-drive system
- Lightweight nylon chassis with front and rear stiffeners for rigidity
- Big bore oil shocks for superior impact absorption
- Kyosho 550 Class G14L brushed motor with 60A ESC
- Flexible pinion gear range: 21T–29T for customised performance
- Grease-filled bevel diffs front and rear
- Full ball bearing drive system throughout
- Includes Syncro KT-231P+ 2.4GHz transmitter
- RTR ready to run – fully assembled and pre-painted with decals
- Compatible with 7.2V NiMh or 7.4V 2S LiPo batteries (T-connector)
Frequently Asked Questions
The Rage 2.0 is ready to run out of the box with no assembly required, making it accessible to beginners. However, it's a serious off-road buggy designed for enthusiasts who want tuning flexibility and performance, so some basic RC knowledge would be beneficial to get the most from it.
The car is compatible with both NiMh and 2S LiPo batteries thanks to its 60A electronic speed controller. The product listing does not specify which batteries are included in the box, so you should confirm with the retailer or check the manual before purchase.
The Rage 2.0 arrives fully assembled and ready to run, including the Syncro KT-231P+ 2.4GHz transmitter, a pre-painted and decalled American Rock Racer-inspired body, and all electronics installed. For a complete list of included components and spares, consult the product documentation.
At 1/10 scale, this is a standard-sized RC buggy suitable for outdoor off-road use on varied terrain. The exact dimensions are not listed, but 1/10 scale buggies typically measure around 50–60 cm in length, making them suitable for open fields, parks, and designated RC tracks.
The new model features a lightweight nylon chassis with strategic stiffeners for improved rigidity, a low centre of gravity deckless design, big bore oil shocks, and optimised front-to-rear geometry for responsive handling and precise control across technical terrain and open ground.
