Kyosho Wave Chopper 2.0 Rc Electric Readyset (Kt231p+) T2 Blue
Key Specs
About this product
Description
PVC (soft vinyl) rider figure wearing helmet and wet suit is mounted on the pre-painted factory-assembled vacuum molded ABS hull, complete with decals attached to recreate the atmosphere of a real water bike. ※Rider figure is not movable.
Kick-up rudder protects both the rudder and the hull from unexpected contact and delivers smooth performance. Water intake bracket channels water into the water jacket on the motor for effective cooling.
Optimal angle of the stern tube along the bottom of the hull reduces drive resistance, allowing the fully submerged propeller to generate sharp acceleration and maneuverability.Hull incorporates built-in waterproof radio box, further supported by waterproof speed controller and rudder servo for even greater protection.
Pre-painted rider figure is included and recreates a realistic atmosphere with its racy style.
Pre-installed 550-size G14L motor is fitted with water-cooling jacket to prevent heat loss. High-rigidity suspended motor mount maximizes drive efficiency and maintenance efficiency.
Power of the water-cooled G14L motor is optimized with the large capacity 60A waterproof KYOSHO SPEED HOUSE KA060-91W speed controller with reverse function.
Included 2.4GHz Syncro KT-231P+ transmitter automatically manages frequency bands. Volume dials make precision setting adjustments easy to suit your driving style.
7.2V-2200mAh NiMH battery and USB delta peak charger are included with the pre-assembled hull and transmitter.
Simply set 4 x AA batteries (sold separately) into the transmitter and charge the NiMH battery for the hull and this model can be easily enjoyed by anyone.
Technical Data
■Length 595mm
■Width 220mm
■Height 350mm
■Weight 1,600g approx.
■Transmitter KT-231P+
■ESC KYOSHO SPEED HOUSE
KA060-91W
■Servo KS4031-06W
■Motor 550-class G14L motor with water-cooling jacket
■Battery 7.2V-2200mAh NiMH
■Compatible battery size L148xW52xH30mm or less
■Charger Ni-MH battery dedicated USB charger
■Propeller D31xP1.4 (Polycarbonate)
■Maximum speed 24km/h approx.
■Operation time 5 min approx.
Kit Contents
【Readyset Contents】
●Fully assembled hull
●Syncro KT-231P+ transmitter
●Injection molding boat stand
●Painted figure
●Hex wrench（1.5＆2.5)
●Spanner（4.0＆5.5）
●Receiver antenna pipe
●7.2V-2200mAh Ni-MH Battery/
●Ni-MH battery dedicated delta peak USB charger/PVC tape for waterproofing
Required For Operation
<Required for Operation>
AA-size alkaline batteries x 4 for transmitter
Frequently Asked Questions
Yes, the Wave Chopper 2.0 is a Ready to Run model that arrives pre-assembled and fully painted, requiring no building or technical knowledge. With intuitive controls via the KT231p+ transmitter and straightforward setup—just add 4 AA batteries to the transmitter and charge the included hull battery—it's designed for anyone to enjoy straight out of the box.
The set includes a 7.2V 2200mAh NiMH battery and a dedicated USB delta peak charger for the hull. You'll need to separately provide 4 AA batteries for the KT231p+ transmitter.
The Readyset includes a fully assembled and painted hull with the realistic rider figure already mounted, the KT231p+ 2.4GHz transmitter, the 7.2V 2200mAh NiMH battery, USB charger, and all necessary waterproof electronics pre-installed. You only need to add 4 AA batteries to the transmitter to be ready to launch.
The Wave Chopper 2.0 measures 595mm in length, 220mm in width, and 350mm in height, with an overall weight of approximately 1,600g. This makes it a medium-sized speedboat suitable for lakes and calm water.
The boat features a 550-class G14L motor with a water-cooling jacket that draws water through an intake bracket to prevent heat loss during operation. Combined with a high-capacity 60A waterproof speed controller and a suspended motor mount, this setup delivers sharp acceleration and responsive maneuverability.
Customer Reviews
Compatible Parts
