HPI Racing Clear Trophy Buggy Flux Bodyshell W Masks and Deca 
HPI Racing Center Drive Shaft Set 
Alu Damper Bush Lightweight (4) Kyosho Inferno Mp10 Mp11 
HPI Racing Front Upright Set (8 Degree/10 Degree) 
Centro Cb1 Rc10b7 Race Body 0.50 Light Weight 
Etronix Deans 2s Battery Harness for 2 Packs in Series 14awg Silicone Wire 
Key Specs
About this product
The Kyosho Inferno MP10 TKI3 18 4WD RC Nitro Buggy Kit (item K.33026B) is an unbuilt kit version of Kyosho’s Inferno MP10 (1/8 nitro buggy chassis) — one of the most decorated platforms in the Kyosho Inferno line. It builds on the multi-WC-winning MP10 platform that has dominated 1/8 racing for years.
Designed for competition racers and serious club drivers, this Kyosho Inferno kit lets you build the chassis to spec, fit your own engine, and pair the drivetrain with your preferred radio gear and shocks tuning. It’s the reference 1/8 platform for European nationals and worlds-spec racing — the same chassis architecture used by Kyosho’s factory team.
Why competition racers choose the Inferno MP10 kit
- Race-proven chassis — MP10 architecture used by Kyosho’s factory racers worldwide
- Nitro-ready chassis — standard Kyosho 1/8 engine mount, pipe and fuel-tank locations — fit a .21-class glow engine of your choice
- Big-bore shocks — oil-filled, threaded-body shock absorbers with adjustable spring preload
- Full ball-bearing drivetrain — metal driveshafts and CVD universals on the front diff path
- Adjustable everything — ride height, camber, toe, droop, shock position, anti-squat — all corner-by-corner
- Deep aftermarket support — option parts, hop-ups and replacement spares stocked at Radio Controlled UK
Specifications
| Item code | K.33026B |
| Brand | Kyosho |
| Scale | 1/8 |
| Drivetrain | 4WD nitro |
| Vehicle type | Buggy |
| Format | Kit |
| Chassis platform | Inferno MP10 (1/8 nitro buggy chassis) |
| EAN | 4548565446131 |
Pair this Inferno MP10 kit with your preferred 1/8 nitro engine, glow plug, exhaust pipe and fuel tank fittings, fit your servo and 2.4 GHz radio system, and finish with a Kyosho-compatible 1/8 buggy body to complete the build. We stock the full Kyosho Inferno parts and option-parts catalogue at Radio Controlled UK to support your build and your race campaign.
In stock and ready to ship from our UK warehouse.
Frequently Asked Questions
Nitro — this Inferno MP10 runs on glow-fuel powered by a Kyosho nitro engine. You will need 25% nitro fuel, a glow-plug igniter and a starter box if not using the optional pull-start.
This is a kit — supplied unbuilt, no engine/motor, ESC, servo, receiver, transmitter, body paint or battery included. You build the chassis from the box and add your preferred electronics. For a turn-key version, see the Inferno MP10 ReadySet.
1/8 scale — the dominant scale class for off-road buggy racing worldwide. The Inferno MP10 is 4WD.
Many wear parts (shocks, ball bearings, suspension hardware, wheel hubs, body posts) carry over between Inferno generations, but key chassis-specific items (chassis plate, bulkheads, bumpers, body shells, certain drivetrain pieces) are model-specific. Always check the part number against your model. Radio Controlled UK stocks the full Kyosho Inferno parts catalogue — search by your platform code (MP10).
The MP10 kit is a competition-class chassis, so we recommend at least intermediate building experience. If you've never built an RC kit before, the Inferno Neo ReadySet is a friendlier starting point.
