Ball Driver Hex Wrench 2.5 X 120mm 
Pre-Painted Body Shell Nitro Tracker 
HPI Racing Super Star Wheel Gunmetal Rear (120X75Mm) 
Center Diff Plate Kyosho Inferno Mp9 Readsyet (If443b) 
Kyosho 12x18x4mm (2) bearings 
Fastrax Aluminium Steering 5-Spoke Wheel - Sanwa, Futaba, Flysky 
Washers m4x10x0.8mm (10) Kyosho 
HPI Racing Flywheel Cover Screw Set 
Kyosho Gear Differential Grease #1000 CPS (15g) 
Flat Head Tp Screws M3x10mm (10) Kyosho 
Kyosho Autoscale Mini-Z Toyota Corolla Levin Ae86 Red-Black (Ma020) 
Kyosho 3x6mm (10) blue bombers 
Koswork Leisure Transmitter Bag (250x140x210mm) 
Suspension rings for Kyosho UMW705 (UB008-01) 
Kyosho Inferno Mp11 Front Lower Suspension Holder (Fr) 
Kyosho Ultima rb7.5 Shock Springs d1.2x5.25x44 / 3.6 (2) 
1:8 Truggy Wheel AIR yellow (4) 
Body Shell Kyosho Legendary Serie Tomahawk/Ultima Jj 
BLACKZON Slyder MT Wheels/Tires Assembled (Black/Yellow) 
1:8 BUGGY WIND SOFT PRE-MOUNTED YELLOW 2PCS "H COMPOUND" 
1:8 BUGGY VULCANO ULTRA SOFT 4PCS RUBBER BULK "H COMPOUND" 
1:8 BUGGY CHESTE CLAY SUPER SOFT PRE-MOUNTED YELLOW 2PCS "CH COMPOUND" 
1:8 BUGGY MIURA HARD RUBBER 4PCS RUBBER BULK "H COMPOUND" 
Kyosho Autoscale Mini-Z Skyline Gt-R Nismo R32 White (Ma020n-L) 
Tyres Kyosho Ep Ultima Sb Dirtmaster (4) 
BLACKZON Pinion Gear 16T With Screw Set 
Fuel Tank Bush Set Kyosho Inferno Mp9-Mp10 Mp11 
Kyosho Ultima rb7.5 Crank Arms Shaft 
Suspension Shaft 27mm Kyosho Ep Ultima Sb Dirtmaster (2) 
Main Chassis Kyosho EP Fazer Kobra-Rage VE-Dirt Hog 
Kyosho Moto Hanging on Racer Honda NSR 1991 1:8 Kit
Key Specs
About this product
The Kyosho Moto Hanging on Racer Honda NSR 1991 1:8 Kit (item K.34932B) is a Kyosho 1/8 scale RC motorbike kit on the iconic Hanging On Racer platform. The GP500 replica recreates a championship Grand Prix bike in a working RC format — one of the most distinctive Kyosho platforms in the range.
Sold as a kit, this version is the unbuilt motorbike chassis — you supply the brushed motor, ESC, servo, receiver, transmitter and battery to complete the build. The Hanging On Racer uses a clever balance system that mimics real motorcycle lean-in cornering, with a rider figure that hangs off the bike under throttle and snaps back to centre under braking.
This is one of the more unusual and rewarding platforms in RC. Watching a 1/8 GP bike lean into a corner under throttle is genuinely impressive, and the period-correct livery on the GP500 gives the model real motorsport-history appeal. Spares for the Hanging On Racer are stocked through Kyosho UK distribution, and the chassis is supported by a small but dedicated enthusiast community.
Why fans choose the Hanging On Racer
- 1/8 scale GP motorbike — faithful ${bike} bodywork and decals
- Lean-in cornering — rider figure shifts weight under throttle
- Long Kyosho heritage platform — one of the most distinctive in RC
- Kit format — bring your own motor/ESC/servo/radio/battery
- Period-correct livery
Specifications
| Item code | K.34932B |
| Brand | Kyosho |
| Scale | 1/8 |
| Drivetrain | 2WD (rear) electric |
| Vehicle type | Motorbike |
| Format | Kit |
| Chassis platform | Hanging On Racer (GP500) |
| EAN | 4548565314904 |
In stock and ready to ship from our UK warehouse.
Frequently Asked Questions
1/8 scale RC motorbike replica.
Yes — unbuilt kit. You supply the motor, ESC, servo, receiver, transmitter and battery.
Through a combination of gyroscopic stability from the spinning wheels and a sprung rider figure that shifts weight off the bike under throttle — the bike leans into corners under power and recovers as you decelerate.
Kyosho’s GP motorbike line uses period-correct liveries faithful to the original race bikes.
RC motorbikes have a steeper learning curve than RC cars — rewarding for enthusiasts but not a typical first build.
Customer Reviews
Compatible Parts
