Xfly Eagle 40mm Edf Flying Wing Without Tx/Rx/Battery With Gyro - Green
Key Specs
About this product
XFLY EAGLE 40mm EDF FLYING WING WITHOUT TX/RX/BATTERY WITH GYRO – GREEN
XFly Model has been releasing new RC airplanes with continued innovations, and now it is time for a racing aircraft! XFly is proud to announce their first hand launch racer, the Eagle twin 40mm EDF jet. It features special flying wing configuration, newly developed 40mm EDF power system on both wingtips and a large battery bay in the middle of the fuselage.
Powered by a 4S Lipo battery, the factory-installed twin 40mm EDFs allow the plane to exceed 1:1.5 power-to-weight ratio and take off with ease by hand launches. The wear-resistant plastic components under the belly and the wingtips allow the plane to land on rough surfaces. With a streamlined, aerodynamic profile, a special EDF configuration and setup assisted by the custom gyro (optional), the Eagle is capable of delivering differential speeds, performing rolls, flat spins, inverted flat spins and other challenging maneuvers, with a top speed of 110MPH+. It is completely factory-assembled and ready to fly right out of the box. There are two eye-catching color schemes available that you won’t be worried about losing sight of the plane in the sky.
If you are seeking a hand launch racing aircraft, look no further than the XFly Eagle!
Features
- Robust EPO construction.
- Special flying wing configuration and newly developed 40mm EDF power system on both wingtips.
- Large battery bay for a 4S 1800-2200mAh Lipo battery.
- Outstanding power-to-weight ratio.
- Easy hand launches and safe landings on rough surfaces.
- Capable of delivering differential speeds and performing rolls, flat spins, inverted flat spins and other challenging maneuvers, when assisted by the custom gyro. Top speed can reach 110MPH+.
- Completely factory-assembled and ready to fly right out of the box.
- Available in two eye-catching color schemes.
Specifications
Wingspan: 1019mm/40in
Overall Length: 383mm/15in
Flying Weight: 650g
Motor Size: 1413-KV5000*2
ESC: 20A*2
Servo: 9g servos*2
Channels: 5 channel – aileron, elevator, throttle, rudder, gyro
CG: 162mm from the leading edge
Wing Load: 35g/dm²
Wing Area: 19.5dm²
Recommended Battery: 4S 2200-2600mAh
Battery Connector: XT60
Approx Flying Duration: 5-10 mins
Build & Test Time: 3 mins
Skill Level: Intermediate/Advanced
Age Level: 14 years +
Flap: No
LED: No
Retract: No
Landing Gear: No
EDF Size: Twin 40mm EDF 12-blade
For further information: on flying your RC plane in a safe and responsible manner please check out www.bmfa.org
Frequently Asked Questions
This is designed for experienced pilots only. It's a high-performance racing wing capable of 110mph+ speeds and advanced aerobatics, requiring skill to control safely.
You'll need a 4S LiPo battery; the plane is compatible with 1800–2200mAh capacity. The battery is not included and must be purchased separately.
The plane arrives factory-assembled and ready to fly, but does not include a transmitter, receiver, or battery—you must supply these separately.
The wingspan is 1019mm (40 inches) and overall length is 383mm (15 inches). It comes in two eye-catching colour schemes designed to keep it visible in flight.
Twin 40mm EDFs deliver 110mph+ top speed with a 1:1.5 power-to-weight ratio. With gyro assistance, it's capable of rolls, flat spins, inverted flat spins and other advanced aerobatic maneuvers.
