Xfly 50Mm Twin A-10 Warthog
£219.99
Just a few left
XFLY 50MM TWIN A-10 WARTHOG 1000MM WINGSPAN w/o TX/RX/BATT
The Fairchild Republic A-10 Thunderbolt II is a single-seat twin turbofan engine, straight wing jet aircraft developed by Fairchild-Republic for the United States Air Force (USAF). It is commonly referred to by the nickname’s ‘Warthog’ or ‘Hog’, and although the A-10’s official name comes from the Republic P-47Thunderbolt, a World War II fighter-bomber effective at attacking ground targets.
The A-10 was designed for close air support (CAS) of friendly ground troops, attacking armored vehicles and tanks, and providing quick-action support against enemy ground forces. It entered service in 1976 and is the only production-built aircraft that has served in the USAF that was designed solely for CAS.
The Scale Jet With High Performance
Thenew XFly A-10 Thunderbolt II is a scale replica of this iconic U.S. Air Force aircraft in a smaller size for more RC pilots to enjoy in more places. Twin high-power 12-blade 50mm EDF’s, twin 40A ESC’s and a singlr 4S 2200mAh-2600mAh battery all combine to deliver top speed and produce an abundance of thrust compared to other models in its class, while also delivering a wide range in flight times.
With strong landing gear and steerable nose wheel, the A-10 Thunderbolt can taxi, take-off and land on paved runway, packed dirt or grass surfaces. You can choose to leave the landing gear off for hand launches to get more speed and better vertical performance.
This model is conveniently sized for flying at large parks, sports fields, or traditional RC flying fields and so it can be stored and transported without disassembly.
If you are looking for a classic and smaller sized EDF jet, do not miss the XFly A-10 Thunderbolt II twin 50mm EDF jet!
Specifications
Skill Level:Â Intermediate / Advanced
Material:Â Lightweight yet strong EPO, ABS engineering plastics
Wingspan:Â 1000mm
Overall Length:Â 920mm
Wing Load:Â 74g/dm2
Wing Area:Â 16.1dm2
Flying Weight:Â 1190g
Propeller/EDF:Â 50mm 12-Blade Fan*2
Motor:Â 2627-KV4600 Brushless Inrunner Motor
ESC:40A*2
Servos:Â 9g Digital Servo*4
Flying Duration:Â 6-8 minutes
Landing Gear:Â Fixed main landing gear, steerable nose gear
Channels:Â 4CH-Throttle, ailerons, elevator and front gear
Recommended Battery:Â 14.8V 2200mAh-2600mAh
Build & Test Time:Â Around 20 minutes