Key Specs
About this product
The new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a LiPo 2S/7.4V battery for operation. In addition, a separately available programming box (item 2110062) can be used to adjust various parameters such as braking force, punch, low-voltage protection and more.
The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle extremely. Also the handling becomes almost impossible due to the enormous over-motorization. Therefore, we generally advise against 3S driving.
4 adjustable aluminum oil-pressure shock absorbers offer ideal handling, so that a lot of driving fun. The spring preload can be adjusted via a knurled screw. Thus, the chassis can be perfectly adapted to your needs.
- 4WD all wheel drive
- 2.4GHz 4-channel radio system
- 60A brushless speed controller (waterproof; T plug; programmable)
- 3421KV brushless motor (sensorless; splash-proof)
- 15kg metal gear steering servo (25T; ball bearings)
- 8 Aluminium oil shock absorbers
- Ball bearing main drive
- Extremely durable composite plastic parts
- Steel differential outdrives
- Aluminium main drive shaft with steel mounts
- Adjustable upper tie rods
- 5mm aluminium engine mount
- 6mm shock towers
- 2 differentials (front/rear)
- Stylish Monster Truck body with add-on parts
- “Light-Weight” chassis (less weight – longer driving time)
- Many aluminum option parts available
- Scale: 1:10
- Dimensions (L/W/H): 425x300x200 mm
- Weight: 2090g
- Wheelbase: 270mm
- Ground clearance: approx. 45mm
- Track width: 250mm front/rear
- Wheels front/rear: Ø 116mm / Width: 57mm
- Shock absorber oil: 400CPS
- Shock absorber installation length: 100mm
- Motor ratio: 17T / main gear: 64T (module 0.6)
- 1/10 Brushless Monster Truck “AMT3.4BLV2” RTR
- 2.4GHz CR4S radio
- Sticker sheet
- Manual
- 4 AA batteries for radio
- 7.4V/2S LiPo car battery
- Charger (suitable for car battery)
- Programming box for individual settings of the speed controller
- NEW* 60A brushless speed controller with T connector and 3421KV motor
- NEW* Programmable speed controller
- NEW* 15 kg steering servo with metal gear
- NEW* LED lighting
- NEW* Monster Truck body with many add-on parts
- NEW* even more option parts available
Frequently Asked Questions
Yes, the included CR4S remote control features a Beginner Mode that reduces speed by 50%, making it ideal for less experienced pilots. However, as a 1:10 brushless monster truck, it's still a powerful vehicle that benefits from some RC experience.
The truck is recommended to run on a 2S/7.4V LiPo battery (not included in the box). Whilst it can technically use a 3S/11.1V battery, this causes excessive wear and poor handling, so we advise against it.
The truck arrives ready-to-run and includes the vehicle itself, a 2.4GHz 4-channel remote control (CR4S), a waterproof 60A brushless speed controller, and all necessary mechanical components. You will need to supply a 2S/7.4V LiPo battery separately.
This is a 1:10 scale monster truck, which is a popular mid-size for RC vehicles. The exact dimensions aren't specified, but check the manual or product images for precise measurements if space is a concern.
Yes, the four aluminium oil-pressure shock absorbers have adjustable spring preload via knurled screws, allowing you to adapt the chassis to your driving style. For more advanced tuning of braking force, throttle response and low-voltage protection, a separately available programming box (item 2110062) can be used with the 60A speed controller.
