Kyosho Inferno MP10 TKI3 18 4WD RC Nitro Buggy Kit
£699.99
Just a few left
for same-day dispatch
costs calculated at checkout
Calculating next-day window…
Timing depends on your postcode & courier capacity.
The 1/8 scale GP Buggy is one of the most popular R/C car racing categories in the world. As the benchmark for competitiveness, the Inferno Series has led development through continued innovation, encouraging efforts by other manufacturers to improve their machines year by year. Based on the existing MP10 TKI2, the latest TKI3 Inferno model incorporates components and design elements that were developed for the 2022 IFMAR (International Model Car Federation) World Championships. By changing the body design, the TKI3 can adapt to a wide range of track layouts, from technical circuits with tight corners to high-speed courses typically found in Europe. Adjustable wing height also expands the range of aerodynamic settings. Thicker gauge wire in new suspension springs was introduced for the World Championships for tighter cornering control. In addition, a review of the drive system incorporated a smaller center differential with revised gear ratio and a lighter spur gear plus 3-piece clutch to improve throttle response. The MP10 TKI3 is now more capable and more adaptable to different types of course layouts, not only for high-level competition, but also just for the fun of driving very fast. Whether you are competing at the highest level or simply enjoying an R/C car in its purest form, the TKI3 exceeds all expectations.
●The Inferno MP10 continues on its evolutionary path, boasting achievements in major races including the World Championships.
●Shaft-type 4WD delivers higher speed with superior reliability. Reduction ratio can be changed for compatibility with high-speed circuits.
●Optimal front-to-rear weight balance realizes superior maneuverability by positioning heavier components towards the front of the chassis.
●Newly designed body with advanced aerodynamic performance increases cornering speed and can be used interchangeably with the existing TKI2 body.
●Equipped with wing spacers for adjusting wing height to change handling characteristics for optimal maneuverability.
●Downsized center differential realizes improved throttle response.
●Newly developed springs for long diaphragm-type front and rear oil shocks deliver superior suspension stability.
●Unassembled kit includes wheels, body and wing.
●Hard-type wheels deliver improved stability on high-speed circuits and over rough surface gaps.
Tech Spec:
■Length 490mm
■Width 307mm
■Height 180mm
■Ground clearance 28mm
■Wheelbase 325mm
■Tread（Ｆ／Ｒ） 254mm
■Tires（Ｆ／Ｒ） sold separately
■Gear Ratio 11.7：1
■Weight 3,360g(approx.)
■Engine 21Class (sold separately)
Kit Content:
●Unassembled chassis kit
●Special wheels
●Wing
●Special clear body
●Window mask seal
●Logo decals
●Fuel tube
●Linkage parts
●Clutch parts
●Air cleaner
●Ring gear grease
●1.5, 2.0, 2.5mm Hexagonal wrench
●Cross wrench
●Wheel wrench
Required to complete:
●2-channel 2-servo R/C system for cars
●Compatible batteries for R/C system
●21 engine
●Muffler
●Tires w/foam inserts for 1/8 buggy
●Starter box
●Plug heater
●Fuel
●Fuel bottle
●Oil for air cleaner
●Shock oil
●Diff oil
●Paint for car body
●Tools
Frequently Asked Questions
This is a competition-level nitro buggy designed for experienced drivers. Nitro cars require fuel mixing, engine tuning, and maintenance skills, so we'd recommend prior RC experience before attempting this kit.
This is a kit, so assembly is required. The product description doesn't specify which components are included, so please check the detailed kit contents or contact us to confirm whether engine, radio, and other major parts are included or sold separately.
The 1/8 scale means the car is approximately 50cm long depending on final build. Exact top speed isn't listed, but as a championship-proven 4WD nitro buggy with a refined drive system, it's designed for competitive racing and will deliver very high speeds once properly tuned.
Yes, the TKI3 body design allows it to adapt to varied track layouts, from technical circuits with tight corners to high-speed European courses. Adjustable wing height and aerodynamic settings let you optimise performance for different conditions.
As a nitro-powered RC car, it uses nitromethane-based fuel mixed with engine oil. Runtime per tank isn't specified in the product information, so please consult the manual or contact us for typical fuel consumption and running time details.
Browse the full Kyosho range at Radio Controlled UK, including Kyosho competition buggies, Kyosho Mini-Z micro racers and genuine Kyosho spare parts. View all current stock in the Kyosho product archive.
Related products
-
RC Kit BundlesRC Kit Bundles, RC Nitro engine parts, RC Servos, RC Wheels & Tyres, Nitro RC Cars, RC Car kits, RC Car Kits - Nitro, RC Cars off-road, RC Nitro cars, RC Racing cars, Adults 14+, 500-750, 750-1500, Experienced, Expert, 1/8th, RC Racing
Kyosho Inferno MP11 1:8 4WD RC Nitro Buggy Kit – Bundle wheels, engine & servo package
£1,569.99This legendary 1/8 nitro buggy kit bundles everything needed: Kyosho’s race-proven MP11 chassis, REDS engine, and Jetko wheels. Four-wheel drive delivers explosive acceleration and superior handling on rough terrain. Fully assembled suspension with adjustable shocks ensures competitive performance. Ideal for experienced nitro enthusiasts and serious racers seeking proven reliability.
-
RC Car kits
-
RC Car kits
-
Electric RC cars
