Key Specs
About this product
XFLY X1500 LONG ENDURANCE FPV PNP WITHOUT TX/RX/BATTERY – BLUE
XFly X1500 is a long-endurance FPV platform designed for extended flight operations. Constructed from wear-resistant EPP foam and reinforced with high-strength 3D-printed plastic parts, it features a glue-free quick-assembly design that allows deployment within two minutes.
The aircraft adopts a conventional fixed-wing layout, delivering smooth and predictable flight characteristics. Its high-lift airfoil ensures efficient cruise performance, ideal for long-duration missions. Equipped with a twin power system, the X1500 achieves a thrust-to-weight ratio greater than 1 in unloaded conditions, while supporting payloads of 1KG. With its optimised aerodynamics, carefully aligned thrust line and balanced center of gravity, the X1500 can take off effortlessly either by hand launch or via ground roll. Reinforced rubber tyres on the underside enable durable repeated takeoffs and landings.
The spacious battery bay accommodates a standard 21700-4S2P-10000mAh battery (not included) with additional room for extra payloads. A dedicated equipment compartment in the mid-fuselage provides ample space for installing flight controllers, GPS modules, and other avionics. Pre-configured mounting points on the FPV nose cone and battery hatch are compatible with DJI and Walksnail FPV systems, allowing quick integration of video transmission setups. The X1500 is offered in both PNP and KIT versions, giving pilots the flexibility to customise their power and battery configuration according to specific mission requirements.
Features
- Glue-free quick-assembly design.
- Twin efficient power system for a powerful and long-endurance flight experience.
- Wear-resistant EPP foam and rubber tires for improved durability.
- Effortlessly hand-launch or wheeled takeoff/landing.
- Spacious compartments allowing easy integration of multiple avionics.
- Compatible with mainstream FPV systems like DJI and Walksnail.
Specifications
Material: Durable EPP Foam
Wing Span: 1500mm (59.0in)
Length: 1050mm (41.3in)
Flying Weight: Around 1900g
Servo: 9g Metal Gear Servo x 5 (Installed)
Motor: 2212 1400Kv Outrunner Brushless Motor x 2 (Installed)
ESC: 40A Brushless ESC x 2 (Installed)
Propeller: 8 x 5 2 Blade Propeller CW & CCW x 1 Set (Included)
Battery: 21700 4S2P 10000mAh (Not Included)
Radio: 6 Ch Radio Control (Not Included)
Frequently Asked Questions
The X1500 is a PNP (Plug-and-Play) platform designed for pilots with some RC experience who understand FPV systems. You'll need a compatible transmitter, receiver, and FPV system (DJI or Walksnail) to fly it, plus basic knowledge of aircraft setup and safety.
The X1500 requires a 4S 10000mAh battery, which is not included in this package. You'll need to purchase a compatible 4S LiPo or Li-ion battery separately before you can fly.
This PNP package includes the airframe, motors, and electronics pre-installed. You must separately purchase: a 4S 10000mAh battery, a transmitter and receiver (compatible with your chosen system), and an FPV camera system (DJI or Walksnail compatible).
The X1500 is a full-size fixed-wing FPV platform designed for extended endurance flights with its twin-motor setup. Flight time will depend on your specific battery, payload, and flying style, so check the manual or contact support for detailed performance figures.
Yes, the X1500 supports up to 1kg of payload and features a dedicated equipment compartment in the fuselage for flight controllers, GPS modules, and avionics. The FPV nose cone has pre-configured mounting points for DJI and Walksnail FPV systems.
