1:18 Brushless Performance Crawler “The GOAT” RTR

Top Features:

FURITEK Brushless System – programmable via app 

2-spped gear box – shiftable via remote control

LCG aluminum chassis with 5° angle kick-up for a lower engine position and more ground clearance at the rear axle

Redesigned suspension and connection geometry of the entire vehicle

Redesigned optimized weight distribution of the entire vehicle

Servo-On-Axle Setup (SOA) for maximum response

Redesigned body for maximum ground clearance

CVD shafts on the front axle

Newly developed “heavy-duty” drive shafts

Revised wheel/tire combination for maximum traction

Newly developed 55mm “High Volume” Big Bore shock absorber

Fine-tuning of wheelbase, approach and departure angles

The first micro crawler with optional overdrive gears (20%) for the portal axles

This chassis was developed for those who want the best performance on the track right from the start. With the optionally available upgrades, this vehicle can be upgraded to an absolute “line killer”!

The heart of this model is a 2-speed transmission and the new LCG Concept Chassis, which is equipped with revised shock absorber geometry for maximum performance. The newly developed, adjustable Big Bore oil pressure shock absorbers ensure optimum suspension and control on any terrain. Thanks to the SOA (Servo-On-Axle) setup, the GOAT offers improved steering response that takes full advantage of the new super-grippy oversize tires.

The weight distribution has been perfected, anhe powerful brushless drive makes every ride an unforgettable experience. The improved drive shafts ensure efficient transmission of the increased torque to the terrain. Thanks to the excellent electronics and LiPo power, the CR18P EVO Pro offers an impressive runtime of up to 30 minutes per charge.

The low body design allows you to navigate through even the narrowest canyons.

REMOTE CONTROL:

The scope of delivery includes a 2.4 GHz 4-channel remote control with all standard functions (TRIM, D/R, REV). However, as the receiver and speed controller are installed independently of each other, other suitable remote control sets (TX & RX) can of course also be used.

FEATURES FURITEK BRUSHLESS SYSTEM:  

Powerful high-performance 30A/50A LIZARD speed controller with FOC technology designed for 2S LiPos
Integrated Wifi module for programming via the Furitek app (IOS & Android).
Super smooth running without “cogging” at slow and fast speeds in both gears
5V/6.5V 2.5A Built-in BEC (configuration via app)
1212/3450KV VENOM Brushless Motor with 12T CNC pinion

CAR SPECIFICATION: 

Length: 229mm
Width: 141mm
Height: 98mm
Wheelbase: 161mm
Weight: approx. 419g (including battery)
Drive: Full-Lock 4WD
Shock absorbers: 55mm oil pressure with knurled screw
Wheels: 68mm 1.2″ Comp-Spec. Super Soft

ELECTRONIC SPECIFICATION:

FURITEK Lizard Pro Brushless ESC 30A/50A (2S LiPo, Wifi,)
FURITEK Venom 1212 3450KV Motor (12 pole, 12T CNC pinion)
2.4GHz 4-channel remote control
4-channel receiver (PPX4 water resistant)
7.4V 2S LiPo battery 360mAh

SCOPE OF DELIVERY:

1:18 Performance Brushless Crawler “the GOAT”
4-channel remote control
7.4V 2S LiPo battery 360mAh
USB charger
Sticker sheet
Mini tool
Manual (DE/EN/FR)