Key Specs
About this product
XFLY 1800mm TWIN OTTER WITH FLOAT WITHOUT TX/RX/BATT
Modeled after DeHavilland DHC-6 Twin Otter, the XFly Model Twin Otter 1800mm was developed by their team with the intention to make it true-to-scale, from design features such as cockpit with clear windows, control surfaces, fixed tricycle landing gears, twin power system setup, to STOL(Short Takeoff and Landing) capabilities.
Powered by a single 6S 5000-6000mAh LiPo battery, the combination of twin 3541-KV550 motors, twin 40A ESCs and 3-blade propellers brings RC pilots the optimum setup for power and duration. The XFly Twin Otter is capable of aerobatic maneuvers including loops, 4-point rolls and inverted flight. Shock-absorbing metal front landing gear and rigid main landing gears are equipped for easy ground handling and more durability.
Two-piece wing, removable nose and stabs make it easy to assemble, dissemble and transport. Clear glass-like windows allow for FPV installation in the cockpit for better visual experience. Clearly visible in both day and dusk conditions, the vibrant yellow/blue colour scheme and the pre-installed LED lights not only add scale appeal but practical visual reference in the sky. With floats installed (available in the float version XF116PF), more fun can be explored and enjoyed from the XFly Twin Otter!
Features
- Retaining scale features of the full scale Twin Otter
- STOL (Short Takeoff and Landing) capabilities
- Cockpit with clear windows, control surfaces, fixed tricycle landing gears
- Factory-installed twin efficient power system
- Capable of aerobatic maneuvers including loops, 4-point rolls and inverted flight
- Shock-absorbing metal front landing gear and rigid main landing gears
- Two-piece wing, removable nose and stabs
- Clear glass-like windows and capacious cockpit allow for FPV installation
- Pre-installed LED lights for added visibility
- Vibrant yellow/blue colour scheme
- Floats available to install for more fun
Specifications
Overall Length: 1457mm/57.4in
Flying Weight: 4000g
Motor Size: 3541-KV550*2
ESC: 40A*2
Servo: 9g servos*5/6
Channels: 5CH- aileron, elevator, throttle, rudder/steering, flap
CG: 61mm from the leading edge
Wing Load: 87.5g/dm²
Wing Area: 40dm²
Recommended Battery: 6S 5000-6000mAh
Battery Connector: XT90
Approx Flying Duration: 5-10 mins
Assembly Time: 10 mins
Skill Level: Intermediate
Age Level: 14 years +
Flap: Yes
Retract: No
Landing Gear: Fixed main landing gear, steerable nose gear
Prop Size: 3-blade 10*7”
Required To Complete
- Radio
- Transmitter
- Battery and Charger
Frequently Asked Questions
You'll need to purchase a transmitter, receiver, and a 6S 5000-6000mAh LiPo battery separately, as these are not included. A charger for the LiPo battery will also be required.
This is an aerobatic-capable aircraft with twin brushless motors, making it better suited to intermediate or experienced pilots rather than complete beginners. Its STOL capabilities do make it forgiving for takeoffs and landings, but overall flying experience is recommended.
The aircraft measures 1457mm (57.4 inches) in overall length and has a flying weight of 4000g. This makes it a substantial, mid-sized RC plane suitable for outdoor flying areas.
The Twin Otter is powered by twin 3541-KV550 brushless motors paired with twin 40A electronic speed controllers (ESCs) and 3-blade propellers, all running on a single 6S LiPo battery for optimal power and flight duration.
The aircraft comes in Almost-Ready-to-Fly (ARR) condition with the power system pre-installed. Its modular construction features a two-piece wing, removable nose cone, and detachable stabilisers, making it straightforward to assemble, disassemble, and transport.
